Cisco Systems 7920 appendix Click the System Parameters tab

Page 7

10. When this popup window appears, click OK.

11.Click the System Parameters tab.

The System Parameters configuration screen appears. In this case, the Cisco 7920 is using Dynamic Host Configuration Protocol (DHCP) to obtain its IP parameters, including the TFTP address (Cisco CallManager server).

Page 6 Page 8
Image 7
Page 6 Page 8
Contents
Document ID IntroductionRelated Products PrerequisitesRequirements Components Used Background Theory ConventionsNetwork Diagram Using Open Authentication and Static WEP KeysConfiguring the Cisco Step−by−Step Instructions Choose Edit Settings WizardPage Click the System Parameters tab Click the Network Security tab Click the Phone Settings tab Choose Connection Logout Select Cisco 7920 USB and click Stop When this popup window appears, click OK Choose Security Ssid Manager Configuring the Cisco Aironet 1200 APTroubleshooting VerifyingPage Verifying Using Open Authentication, Static WEP Keys, and VLANs Choose Edit Settings Wizard Page Page When this popup window appears, click Yes Select Cisco 7920 USB and click Stop When this popup window appears, click OK Step−by−Step Instructions for Configuring Vlan 1 default Configuring the Cisco Aironet 1200 AP with a VlanChoose Services Vlan Choose Security Encryption Manager Step−by−Step Instructions for Configuring VLAN2 Verifying Configuring 802.1Q Trunking on the Catalyst 2924 XL 2924XL# show interface fastethernet 2/1 switchport 2924XL# show interface fastethernet 2/3 switchport Router# show vlan Configuring the Inter−VLAN RouterUsing Cisco Leap When this popup window appears, click Cancel Click the Network Security tab Select Connection Logout Select Cisco 7920 USB and click Stop When this popup window appears, click OK Click Security Server Manager Configuring the Cisco Aironet 1200 AP for Leap10.21.15.10 Do not check Open Authentication or Shared Authentication Configuring the Cisco Secure Server for Leap Click Submit + Restart Page Page Page Check the Log to CSV Passed Authentications report check box Check the Log to CSV Radius Accounting report check box Click the Passed Authentications active.csv file Troubleshooting GuidelinesCisco 7920 Error Message − Association Failed, No AP Found Cisco 7920 Exhibits Problems After Configuration ChangesIncorrect WEP Keys Cisco 7920 Error Message − No Service IP Config FailedCisco 7920 Error Message − Connecting to CallManager 0−5 Cisco 7920 Error Message − Registration RejectedIP Routing Problems Click Failed Attempts active.csv Leap Authentication FailsCheck for Radius Error Messages on the Cisco Secure Server Click Failed AttemptsTrunking Native Mode Vlan 1 default Check for IP Configuration ProblemsGeneral Troubleshooting Hints Appendix Configuring the Cisco 7920 with CallManagerRelated Information
Related manuals
Manual 5 pages 2.92 Kb Manual 16 pages 62.07 Kb Manual 48 pages 3.26 Kb
Top Page Image Contents