Cisco Systems 7920 appendix Click Submit + Restart

Page 41

Note: This server was originally installed to be used as an Aironet RADIUS Server for a different Cisco Aironet 1200 AP Client. These steps explain how to add another Aironet RADIUS AAA client:

a. Click Add Entry on the AAA Clients menu.

b. Enter the name of the Cisco Aironet 1200 AP (in this case, AP1200−51d4be). c. Enter the IP Address (in this case, 10.21.7.21).

d. Enter the Shared Secret key (in this case, 1A2B3C4D5E6F7G8H).

Caution: This must be the same key that you entered for the Cisco Aironet 1200 AP

Shared Secret key in the earlier subtask. e. Select the other options as appropriate.

The online help files for Cisco Secure ACS provide explanations of the additional fields. In this case, the other options have not been enabled.

f. Click Submit + Restart.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents
Document ID IntroductionRequirements PrerequisitesComponents Used Related ProductsBackground Theory ConventionsConfiguring the Cisco Using Open Authentication and Static WEP KeysNetwork Diagram Step−by−Step Instructions Choose Edit Settings WizardPage Click the System Parameters tab Click the Network Security tab Click the Phone Settings tab Choose Connection Logout Select Cisco 7920 USB and click Stop When this popup window appears, click OK Troubleshooting Configuring the Cisco Aironet 1200 APVerifying Choose Security Ssid ManagerPage Verifying Using Open Authentication, Static WEP Keys, and VLANs Choose Edit Settings Wizard Page Page When this popup window appears, click Yes Select Cisco 7920 USB and click Stop When this popup window appears, click OK Choose Services Vlan Configuring the Cisco Aironet 1200 AP with a VlanStep−by−Step Instructions for Configuring Vlan 1 default Choose Security Encryption Manager Step−by−Step Instructions for Configuring VLAN2 Verifying Configuring 802.1Q Trunking on the Catalyst 2924 XL 2924XL# show interface fastethernet 2/1 switchport 2924XL# show interface fastethernet 2/3 switchport Router# show vlan Configuring the Inter−VLAN RouterUsing Cisco Leap When this popup window appears, click Cancel Click the Network Security tab Select Connection Logout Select Cisco 7920 USB and click Stop When this popup window appears, click OK Click Security Server Manager Configuring the Cisco Aironet 1200 AP for Leap10.21.15.10 Do not check Open Authentication or Shared Authentication Configuring the Cisco Secure Server for Leap Click Submit + Restart Page Page Page Check the Log to CSV Passed Authentications report check box Check the Log to CSV Radius Accounting report check box Click the Passed Authentications active.csv file Troubleshooting GuidelinesCisco 7920 Error Message − Association Failed, No AP Found Cisco 7920 Exhibits Problems After Configuration ChangesIncorrect WEP Keys Cisco 7920 Error Message − No Service IP Config FailedIP Routing Problems Cisco 7920 Error Message − Registration RejectedCisco 7920 Error Message − Connecting to CallManager 0−5 Check for Radius Error Messages on the Cisco Secure Server Leap Authentication FailsClick Failed Attempts Click Failed Attempts active.csvTrunking Native Mode Vlan 1 default Check for IP Configuration ProblemsGeneral Troubleshooting Hints Appendix Configuring the Cisco 7920 with CallManagerRelated Information
Related manuals
Manual 5 pages 2.92 Kb Manual 16 pages 62.07 Kb Manual 48 pages 3.26 Kb
Top Page Image Contents