SETUP
Install/Replace MSAM Cards
Install/Replace MSAM Cards
You may need to install one or more multiple security access module (MSAM) cards or replace the old cards.
CAUTION Observe standard precautions in handling electrostatically sensitive devices. Electrostatic discharges can damage the equipment. VeriFone recommends using a grounded
To change or install | 1 | Remove the data cable from the back of the unit. |
MSAMs | 2 | Place the Vx810 facedown on a soft, clean surface to protect the lens from |
|
| scratches. |
| 3 | Loosen the retaining screw. The restraining screw is captive, which means |
|
| that it cannot be fully removed from the slot. |
Figure 3 MSAM Compartment Door and Locking Screw
4Lift open the compartment door. The MSAM cardholders are now accessible. Each cardholder consists of a slot inboard of a numbered tray.
Figure 4 Opening MSAM Compartment Door
NOTE Before inserting the MSAM card, position it as shown in Figure 5, with the card’s gold contacts facing away from you, toward the unit. The cardholder slot in the Vx810 has a set of contacts. The MSAM card has a notch on one corner to ensure that it fits into the connector base in only one way; the Vx810 has a matching notch cast into the backside of the MSAM compartment door to ensure the MSAM card is positioned correctly when the cover is closed.
12VX810 INSTALLATION GUIDE