Appendix K
Troubleshooting
If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 (800)
My phone | • | Make sure the power cord is securely plugged in. | ||
doesn’t work | • | Make sure that the battery connector is securely plugged | ||
at all. | ||||
| into the cordless handset. | |||
|
|
| ||
|
| • | Make sure the telephone line cord is securely and firmly | |
|
|
| plugged into the telephone base and the telephone wall | |
|
|
| jack. | |
|
| • | Charge the battery in the cordless handset for at least | |
|
|
| 16 hours. For optimum daily performance, return the | |
|
|
| cordless handset to the telephone base or charger when | |
|
|
| not in use. | |
|
| • | Reset the telephone base. Unplug the unit’s electrical | |
|
|
| power. Wait for approximately 15 seconds, then plug it | |
|
|
| back in. Allow up to one minute for the cordless handset | |
|
|
| and telephone base to reset. | |
|
| • | You may need to purchase a new battery, please refer | |
|
|
| to Battery installation and charging (pages | |
|
|
| user’s manual. | |
|
|
|
| |
I cannot get a | • | First try all the suggestions above. | ||
dial tone. | • | Move the cordless handset closer to the telephone base. | ||
|
| |||
|
|
| You might have moved out of range. | |
|
| • | If the previous suggestions don’t work, disconnect the | |
|
|
| telephone base from the telephone jack and connect to | |
|
|
| a different phone. If there is no dial tone on that phone | |
|
|
| either, the problem is in your wiring or local service. | |
|
|
| Contact your telephone service provider. | |
|
| • | Your line cord might be malfunctioning. Try installing a | |
|
|
| new line cord. | |
|
|
|
| |
I cannot dial | • | First try all the suggestions above. | ||
out. | • Make sure you have a dial tone before dialing. The cordless | |||
|
|
handset may take a second or two to find the telephone base and produce a dial tone. This is normal. Wait an extra second before dialing.
73