AT&T E1113B user manual Options while on calls, Volume control, Call waiting, Multiple handset use

Flash

TONE

MUTE REDIAL

DELETE PAUSE

Telephone operation

Options while on calls

Volume control

Press CID/-VOLUMEto decrease the volume. Press DIR /VOLUME+ to increase the volume. When changing the volume level, the new setting is saved.

NOTE: The hands-free speakerphone and headset listening volume are adjusted separately.

Call waiting

Volume	If you subscribe to call waiting service with your
	local telephone company, there will be a beep if
	there is an incoming call while you are already on a
	call. Press PHONE/FLASH to put your current call
	on hold and take the new call. Press PHONE/FLASH
	anytime to switch back and forth between calls. For
	more information on caller ID, see page 30.

Multiple handset use

While on a call, a person on another handset can press PHONE/FLASH or SPEAKER to join the same conversation.

A person on either handset can press OFF/CLEAR, or place the handset in the telephone base or charger to drop out of the call, but the call will not be terminated until both handsets hang up.

NOTES:

1.At any time, a maximum of two handsets can be used on the same outside call.

2.When two handsets are used on the same outside call, the call transfer future cannot be used (page 17).

14