AT&T E1113B user manual Message counter displays

Answering system operation

Message counter

Message counter displays

The message counter usually displays the total number of memos and incoming messages. See the list below for explanations of other displays in this counter.

Message counter displays

0	No messages.
0 (flashing)	The clock needs to be set (page 35).
1-95	Total number of messages and memos,
	or message number currently playing.
1-95(flashing)	Total number of messages and memos.
	The number flashes when there are new
	(un-reviewed) messages.
	If the telephone loses power, after power
	is restored, the number in the message
	counter will flash to indicate the clock
	needs to be set.
10-99	Current remote access code while setting
	(page 37).
1-99(counting)	Elapsed time while recording a memo
	(page 39) or announcement up to 90
	seconds (page 36).
99 (flashing)	Memo recording time has exceeded the
	maximum counter capacity of 99 seconds.
F (flashing)	Memory is full. Messages must be
	deleted before new messages can be
	received.
--	System is answering a call, being
	accessed remotely, or the clock is being
	set.
--(flashing)	System is being setup or initialized.
On (or) OF	Displayed for one second when any
	answering system setting is turned on or
	off.
02, 04, 06, tS	Current number of rings while setting
	(page 37).
1-8	Displayed for one second while telephone
	base speaker volume being adjusted.
HI, LO, OF	Displayed for two seconds while telephone
	base ringer volume being adjusted.

40