AT&T E1113B user manual Remote access, Stop

1. Dial your telephone number from any touch- tone telephone.

2. When system answers, enter two digit remote access code (19 unless you have changed it).

3. Enter remote commands (see list at right).

4. Hang up to end call and save all undeleted mes- sages.

NOTE: If you pause for more than four seconds during remote access, you will hear a help menu listing all features and commands. If there is no command entered for another 20 seconds, the call will end automatically.

Answering system operation

Remote access

A two digit security code is required to access your answering system from any touch-tone telephone. This code is 19 by default, see Changing feature options (page 37) to change it.

Play all messages	Press to hear all messages.
1
Play new messages	Press to hear new messages.
2
Delete message(s)	Press once during playback to
3	delete current message. Press
33	twice to delete all old messages.
Repeat or go back	Press during the caller’s message
	to repeat the message. Press dur-
4
	ing the beginning of the day and
	time announcement to go back to
	the previous message.
Stop	Press to stop any operation (stop
5	playback, stop recording).
Skip to next message	Press to skip current message
6	and advance to next message.
Record announcement	Press * 7, wait for beep, then
*7 to begin recording	begin speaking. Press 5 to stop
	recording and hear playback of
5 to stop recording
	new announcement.
Help menu	Press to hear list of features &
*5	commands.
Turn system off	Press to turn off answering
0	system. Incoming calls will no
	longer be answered.
Turn system on	If off, system will answer after
	10 rings. Enter your access code,
0
	then press 0 to turn the answer-
	ing system on.
Exit	Press 8 or hang up to end the
	remote access call.
8

42