Adding new handsets, To add a new handset

91-000343-020-000-E5630 manual.qxd 2/13/1950 7:21 PM Page 32

Appendix

Adding new handsets

Your telephone can accommodate up to four cordless handsets. You can add new handsets (E560-1, sold separately) to the E5630 and E5633 at any time, but each handset must be registered with the base before use.

The handset provided with your E5630 is automatically registered as Handset 1. Additional handsets will be assigned numbers in the order they are registered (Handset 2, Handset 3, or Handset 4). You can register a maximum of 4 handsets.

The E5633 has 3 handsets automatically registered as Handset 1, 2 and 3. You can register one additional handset, which will be assigned number 4.

The E5634B has 4 handsets automatically registered as Handsets 1,2 ,3,and 4. You cannot register any additional handsets to the E5634B.

Enter base ID, then press SELECT.

ENTER BASE ID

HANDSET 2

Handset 1 Handset 2 Handset 3

Before using a new E560-1 handset, you must register it with the base. During registration, you must enter the 15- digit ID number of the telephone base. The Base ID is located on the bottom of the base unit.

To add a new handset:

•Make sure your handset batteries are properly installed and charged.

•Your handset will display “SEARCHING...”

•Press and hold the SELECT key until the handset displays “ENTER BASE ID”.

•Enter the 15-digit Base ID number from the bottom of the base unit. (E5630 or E5633)

•Press SELECT to accept the code and complete registration.

NOTE: If an invalid Base ID code is entered you will hear an error tone and the handset will continue to display “ENTER BASE ID”. To make

corrections while entering the code, you can erase digits by pressing the DELETE key.

Once a valid base ID code is entered and accepted by the base unit, the new handset will be assigned the next available handset number (Handset 2, Handset 3, or Handset 4). You can register a maximum of four handsets per base unit.