1. Make sure the answering system is on.
2.
Press TIME SET
The system will announce the cur- rent clock setting, then announce is “To change clock, Press TIME
SET!¨
3.
Press TIME SET
4.
Press CHANGE
until the system announces the cor- rect day, then press TIME SET.
5.
Press CHANGE
until the system announces the cor- rect hour, then press TIME SET.
6.
Press CHANGE
until the system announces the cor- rect minutes, then press TIME SET.
NOTE: You can press and hold CHANGE to advance the minutes in increments of ten.
7.
Press CHANGE
until the system announces the correct year, then press TIME SET. The system announces the current
clock setting.
Answering System Operation
Day and time announcements
To set day and time
Before playing each message, the answering system announces the day and time the message was received.
Before using the answering system, you should follow the steps at left to set the day and time, so messages are dated correctly.
The system uses voice prompts to guide you. Each time you press CHANGE, the day, hour, minute or year advances by one. When you hear the correct setting, press TIME SET to move to the next setting.
To check day and time
You can press TIME SET at any time to hear the current day and time without changing it.
NOTE: Press and hold CHANGE to advance the minute or year by 10 .
NOTE: After you set the time once, it will thereafter be set automatically with incoming Caller ID information. The time will be set automatically only if you subscribe to Caller ID service provided by your local telephone company (see page 5).
23