AT&T HS-8211 user manual Contents

Page 3

CONTENTS

INSTALLATION	. 3	TELEPHONE MEMORY	.12
Before You Install	3	Store Memory Numbers	12
Table/Desk Installation	5	Change/Replace a Stored
Wall Installation	6	Memory Number	12
TELEPHONE OPERATION	. 8	Dial Memory Numbers	12
TELEPHONE OPERATION	. 8	Store a Pause in a
Make or Answer a Call	8	Memory Number	12
End a Call	8	Directory Label	12
Change Channel	8	BATTERIES	.13
Redial	8	BATTERIES	.13
Handset Volume	8	Charging the Handset
Flash/Call Waiting	8	Battery Pack	13
Page/Handset Locator	9	Replacing the Handset
Temporary Tone Dialing	10	Battery Pack	14
Handset Ringer Style	10	IN CASE OF DIFFICULTY .	15
Ringer Off/Battery Save	10	IN CASE OF DIFFICULTY .	15
Headset Jack	11
Operating Range	11

1

Image 3

Contents Part 1 Important Product Information MHz Cordless Telephone HS-8211Advanced American Telephones. All rights reserved Contents Installation Before You InstallInstall the handset battery Attach the belt clip to the cordless handset optional Table/Desk Installation Set the dial modeCheck for dial tone Wall Installation Connect the telephone line cord Connect the power cordPosition the wall mount adapter on the base Mount the base on the wall Follow Steps 3-5 in Table/Desk InstallationTelephone Operation Telephone Operation Ringer Off/Battery Save Temporary Tone DialingHandset Ringer Style Operating Range Headset JackTelephone Memory Batteries Charging the Handset Battery PackReplacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phoneIf you lose a call after changing channels