AT&T HS-8211 user manual Table/Desk Installation, Check for dial tone, Set the dial mode

Page 6

INSTALLATION

Table/Desk Installation

Standard

Modular

electrical outlet

telephone

jack

1 Connect the telephone line cord.

2Connect the power cord.

3Charge the handset battery.

Place the handset in the base. Charge the battery for at least 24 hours the first time. After the first charge, the battery is typically fully charged overnight.

4Check for dial tone.

After the batteries are charged, pick up the handset and press P; you should hear a dial tone.

5Set the dial mode.

If you have touch tone service, the phone is ready to use as soon as the batteries are charged.

If you have dial pulse (rotary) service, you’ll need to change the dial mode. When the phone is off, press G, *, #, Mto set the dial mode to dial pulse. To return to touch tone dialing, press G,

*, *, M.

5

Image 6

Contents MHz Cordless Telephone HS-8211 Part 1 Important Product InformationAdvanced American Telephones. All rights reserved Contents Installation Before You InstallInstall the handset battery Attach the belt clip to the cordless handset optional Table/Desk Installation Set the dial modeCheck for dial tone Wall Installation Connect the telephone line cord Connect the power cordPosition the wall mount adapter on the base Follow Steps 3-5 in Table/Desk Installation Mount the base on the wallTelephone Operation Telephone Operation Ringer Off/Battery Save Temporary Tone DialingHandset Ringer Style Headset Jack Operating RangeTelephone Memory Charging the Handset Battery Pack BatteriesReplacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phoneIf you lose a call after changing channels