AT&T HS-8211 user manual Wall Installation, Position the wall mount adapter on the base

Page 7

INSTALLATION

Wall Installation

1 Position the wall mount adapter on the base.

Align tabs on wall mount adapter with holes on bottom of base. Snap wall mount adapter firmly into place.

2Connect the telephone line cord.

3Connect the power cord.

6

Image 7

Contents Part 1 Important Product Information MHz Cordless Telephone HS-8211Advanced American Telephones. All rights reserved Contents Before You Install InstallationInstall the handset battery Attach the belt clip to the cordless handset optional Set the dial mode Table/Desk InstallationCheck for dial tone Connect the telephone line cord Connect the power cord Wall InstallationPosition the wall mount adapter on the base Mount the base on the wall Follow Steps 3-5 in Table/Desk InstallationTelephone Operation Telephone Operation Temporary Tone Dialing Ringer Off/Battery SaveHandset Ringer Style Operating Range Headset JackTelephone Memory Batteries Charging the Handset Battery PackReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels