AT&T EL52110 Call screening setup, Press MENU/SELECT to select Call Screening, Number of rings

Page 22

Telephone settings

Answering system settings

Call screening setup

You can choose whether incoming messages are played through the speaker on the telephone base while they are being recorded.

To change the settings:

1. Press MENU/SELECT when in idle mode to enter the main menu.

2.Press DIR or CID to scroll to >ANSWERING SYS, then press MENU/SELECT.

3.Press DIR or CID to scroll to >ANS SYS SETUP. Press

MENU/SELECT.

4.Press MENU/SELECT to select >CALL SCREENING.

5.Press DIR or CID to choose between ON and OFF.

CALL SCREENING >ON

6. Press MENU/SELECT to confirm your setting. A confirmation tone sounds.

NOTE: For more details about the call screening feature, see Call screening on page 42.

Number of rings

You can set the answering system to answer an incoming call after two, four or six rings. You can also select toll saver, which is explained below. Unless you change it, the answering system answers an incoming call after four rings.

To set the number of rings:

# OF RINGS

1.

Follow Steps 1-3 in Call screening setup on this page.

>4

 

 

2.

Press DIR or CID to scroll to ># OF RINGS, then press

 

 

 

 

 

MENU/SELECT.

 

 

3.Press DIR or CID to scroll and choose among 2, 4, 6 or TOLL SAVER.

•Toll saver - the answering system answers a call after two rings if you have new messages, and after four rings when there are no new messages. This feature allows you to check for new messages and avoid paying long distance charges if you are calling from out of your local area.

4.Press MENU/SELECT to confirm your setting. A confirmation tone sounds.

NOTE: If you subscribe to a voicemail service offered through your telephone service provider, see Answering system and voicemail on page 41.

17

Page 21 Page 23
Image 22
Page 21 Page 23
Contents User’s manual Congratulations Parts checklist Table of contents Answering system Caller IDAppendix Avoid placing the telephone base too close to Quick reference guide Using menus Main menuTelephone base installation Important InformationBattery installation Battery installation and chargingCharge light LOW Battery or Handset Battery chargingBattery indicators Battery status Action Place in ChargerWall mount installation Tabletop to wall mount installationDSL filter Wall mount to tabletop installation Menu overview Menu structurePress MENU/SELECT to select Ringer Volume Handset settingsRinger volume Ringer toneVoicemail waiting visual message waiting indicator Clear voicemail indicationKey tone Set date/timeDial mode Home area codeTo play the current announcement Answering system settingsAnnouncement To record a new announcementUsing the telephone base Answering modeUsing the handset To delete your announcementPress MENU/SELECT to select Call Screening Call screening setupNumber of rings Remote access code Message alert toneTelephone base ringer volume On-hook dialing predialing Making, answering and ending a callMaking a call To make a call While the telephone is ringing, press OFF/CLEAR orSpeakerphone Answering a callEnding a call Redial To delete a number in the redial list Options while on calls Temporary tone dialing To access the directory while on a callTo access the caller ID history while on a call Chain dialingTo access the redial list number while on a call To start the paging tone Handset locatorTo stop the paging tone Shows Directory Empty Exiting the directory Directory overviewDirectory memory capacity Speed dial overviewCreating directory entries To create a new directory entryDial To add a predialed telephone number to the directoryKey To review directory entries Reviewing the directoryTo search by name Screen shows Delete CONTACT?Robert Brown Dialing, deleting and editing a directory entryTo delete a directory entry To edit a directory entryDirectory entry to a speed dial location on this page to Speed dial locationsTo clear a speed dial location Directory EmptyTo dial a speed dial number About home area code About caller IDInformation about caller ID with call waiting To view the dialing options onHow caller ID history call log works Caller ID historyMemory match Caller ID operation Missed new calls indicatorReasons for missing caller ID information To review the caller ID history To view the dialing optionsTo dial a caller ID history number To delete all caller ID history entriesSaving a caller ID history entry in the directory Answering system and voicemail Answering system new message indicationMessage capacity Answering system overviewVoice prompts Call screeningCall intercept Temporarily turning off the message alert toneTo listen to messages at the telephone base Message playbackTo listen to messages To listen to messages at the handsetWhen messages are playing on the handset When messages are playing on the telephone baseOptions during playback To delete all old messages at the handset To delete all old messagesTo delete all old messages at the telephone base Delete ALL OLD, the screen shows no MessageTo record a memo Recording and playing memosTo play back memos Message window displays Remote access To remotely access the answering systemRemote access Screen icons Screen icons, indicator lights and alert tonesHandset indicator lights ANS onTelephone base alert tones Telephone base indicator lightsHandset alert tones ANS ON/OFF lightHandset display screen messages Unable to Save XX Missed CallsCannot get a dial tone TroubleshootingMy telephone doesn’t work at all Cannot dial outMy cordless handset isn’t performing normally Batteries do not hold a charge Charge light is offHear other calls while using my telephone Experience poor sound quality when using the speakerphoneMy calls cut in and out while I’m using my cordless handset My cordless handset does not ring when I receive a call Icon shows on the display and I don’t know why My telephone does not receive caller ID when on a callMy caller ID isn’t working Cannot retrieve voicemail messagesDifficulty hearing messages Answering system does not respond to remote commandsAnswering system announces, Time and date not set Answering system does not record messages Announcement is not clearCommon cure for electronic equipment Taking care of your telephone MaintenanceCleaning your telephone Avoid waterImportant safety information Especially about cordless telephonesEspecially about telephone answering systems FCC Part 68 and Acta Industry CanadaFCC Part What does this limited warranty cover? Limited warrantyHow long is the limited warranty period? How do you get warranty service? Other limitationsDect 6.0 digital technology Technical specificationsBattery capacity 300mAh battery 400mAh battery Telephone operating rangeIndex Index During message Remote access wallet cardAction Remote command Playback
Related manuals
Manual 80 pages 20.71 Kb

EL52110, EL52100 specifications

The AT&T EL52100 and EL52110 are a pair of versatile cordless telephones designed to enhance communication experiences in homes and offices. As part of AT&T's commitment to reliable connectivity, these models combine practical features with user-friendly designs that cater to a variety of needs.

One of the standout characteristics of both the EL52100 and EL52110 is their DECT 6.0 technology. This advanced technology provides superior sound quality, ensures a secure connection, and maximizes the range of the cordless handsets. Users benefit from reduced interference and enhanced clarity, making conversations smoother and more enjoyable.

The EL52100 model offers a modern look with a sleek, ergonomic design, while the EL52110 adds a vibrant color display that enhances usability. Both models come equipped with a large, intuitive keypad, making dialing effortless even for those with limited dexterity. The handsets also feature a built-in answering machine capable of recording up to 22 minutes of messages, allowing users to stay connected even when they are not available to take calls.

A programmable speed dial feature allows quick access to frequently contacted numbers, making it easier to reach family members or business clients. Additionally, the caller ID function displays the name and number of incoming calls, enabling users to screen calls efficiently. Both models are equipped with a speakerphone feature, which gives users the convenience of hands-free conversations.

Battery longevity is another critical feature of the EL52100 and EL52110. Both models are designed with long-lasting batteries that provide hours of talk time and standby time, ensuring that users remain connected throughout the day without frequent recharging. The eco-friendly power supply also helps in reducing energy consumption.

Users will appreciate the intercom feature, allowing communication between handsets located in different rooms. This is particularly useful in larger homes or offices where quick communication is necessary without having to walk from one area to another.

In conclusion, the AT&T EL52100 and EL52110 cordless telephones offer a blend of modern technology, user-friendly features, and robust performance. Whether for personal use or in a professional environment, these models stand out as dependable tools for effective communication. Their sound quality, battery life, and additional features contribute to a seamless communication experience, making them excellent choices for anyone in need of reliable cordless telephony solutions.
Top Page Image Contents