Getting started
Wall mounting
The telephone base can be installed on any standard telephone outlet as shown below. Choose a location away from electronic equipment such as personal computers, com- puter routers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
1)Connect the telephone line cord and the power adapter to the telephone jack at the bottom of the telephone base and the modular telephone wall jack, as shown on page 6.
2) Install the wall mount bracket onto the telephone base. First put the two front wall mount bracket tabs into the front notches 
on the bottom of the telephone base, then squeeze the rear tabs of the wall mount bracket when inserting them into the rear notches 
on the bottom of the telephone base.
NOTE: To disassemble the wall mount bracket, squeeze the rear notches 
while lifting up the wall mount bracket back and away from the telephone base.
3)Plug the power adapter into electrical outlet not controlled by a wall switch.
4) Plug the telephone line cord into a modular telephone wall jack.
5)Position the wall mount bracket
over the wall outlet mounting pegs. Press and slide the wall mount bracket down firmly so it is held securely on the outlet mounting pegs.
b | b |
a a