Directory
Directory overview
The directory is stored in the telephone base. It stores up to 100 entries.
Storing names and numbers
You can add new entries to the directory whenever a telephone number shows on the screen (predial or from caller ID history) by pressing MENU/SELECT then going to step 3 below. To add entries through the menu:
. On a handset, use MENU/SELECT in idle mode. Select >DIRECTORY and then select
>ADD CONTACT.
2.Use the dial pad keys to enter the telephone number (up to 30 digits) or press REDIAL/PAUSE repeatedly and then MENU/SELECT to copy a number from the redial list.
3.Press MENU/SELECT to save the number in the display.
4.Enter the name when prompted. Use the dial pad keys to enter a name (up to 15 characters). Each time you press a key, the character on that key appears. Additional key presses produce other characters on that key. Refer to the character chart in Create directory storage of the
5.Press MENU/SELECT to store your new directory entry. The screen shows SAVED.
While entering names and numbers, you can edit them using the following controls:
•Press 
DIR or 
CID to move the cursor to the right or left.
•Press DELETE to erase digits or characters.
•Press and hold DELETE to erase the entire entry.
•While entering the telephone number, press and hold REDIAL/PAUSE to enter a
•While entering the name, press 0 to add a space.
To review directory entries
. Press 
DIR when in idle mode to show the first entry in the directory.
2.Press 
DIR or 
CID to browse through the directory or press the dial pad keys
NOTE: If the telephone number in the directory exceeds 15 digits, <
appears in front of the telephone number. Press TONE
to move towards the end of the telephone number or press # to move towards the beginning of the telephone number.
13