Battery charging
Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base to charge the battery. For best performance, keep the handset in the telephone base when not in use. The battery is fully charged after 16 hours of continuous charging. See page 26 for battery operating times.
HANDSET 1
16 MISSED CALLS
10:30PM 11/20
If the screen is blank, you need to charge the handset without
interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. The screen shows LOW BATTERY until you have charged the battery without interruption for at least 30 minutes. The following table summarizes the battery charge indicators and actions to take.
|
|
|
|
|
|
|
| Battery indicators | Battery status | Action | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The screen is blank or shows | The battery has no or very | Charge without interruption | ||||||||||||||
| PLACE IN CHARGER. | little charge. The handset | until the screen shows | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| cannot be used. | LOW BATTERY or HANDSET 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (at least 30 minutes). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The screen shows |
|
| The battery has enough charge | Charge without interruption | ||||||||||||
| LOW BATTERY and |
| flashes. | to be used for a short time. | until the screen shows | ||||||||||||
|
| HANDSET 1 (at least | |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 30 minutes). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The screen shows HANDSET 1 | The battery is charged. | To keep the battery charged, | ||||||||||||||
| and the battery icon shows |
| place it in the telephone base | ||||||||||||||
|
|
|
| , |
|
|
| or |
|
|
| . |
| when not in use. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTES:
•If you are on a call in low battery mode, you hear four short beeps every 50 seconds.
•When you place the handset in the telephone base, if no battery is installed in that handset, the CHARGE light is off and the screen shows NO BATTERY. Follow the instructions in
Battery installation on page 4 to install the battery.