MEMORY
Memory Features
Numbers will remain stored in memory unless you erase or change them by entering other numbers.
Capacity: This telephone can stor e 12 different telephone numbers, up to 24 digits long.
Speed Dialing: Nine telephone numbers can be stored in standard
Directory Card: Remove the directory card. Write your telephone number in the space provided. Also write the telephone numbers (or names) that you want to store in each memory location. Reinstall the card and clear plastic cover.
NOTE: You may choose to store emergency numbers in memory locations. This feature is provided only as a convenience and the manu- facturer assumes no responsibility for customer reliance upon the memory feature. Programming/testing of emergency numbers should be performed in the early morning or late evening
Storing Numbers
1Lift the handset or press 
. You will hear a dial tone.
2Press and release 
.
3Dial the telephone number you want to store. You will hear a beep each time you press a button.
4Press and release the memory
button ( 
, 
or ) where you are storing the number. You will hear two beeps to confirm that the number has been stored correctly.
5Hang up or press 
after the number is stored correctly.
Repeat Steps
NOTE: Each time you complete stor - ing a telephone number by pressing a memory location, listen for two quick beeps to confirm that the num- ber has been stored in memory. If you hear several beeps, the number has not been stored: hang up and start over. An extension phone “off the hook” can interrupt program- ming. If you still have trouble, see “In Case of Difficulty.”
Dialing Numbers
1Lift the handset or press 
and listen for a dial tone.
2Press and release a memory button.
Speed Dialing
Storing Numbers
1Lift the handset or press 
.
2Press 
.
3Dial the telephone number you want to store. You will hear a beep each time you press a button.
4Press 
.
5Enter a digit
6Hang up or press 
after the number is stored correctly.
Repeat Steps
Dialing Numbers
1Lift the handset or press 
and listen for a dial tone.
2Press 
.
3Press a memory location
Storing Numbers Just Dialed
Whenever you make a telephone call, you can store the number you dialed without
Dialing,” and pressing 
instead of dialing the telephone number.
Dialing Long Numbers
There are two ways to dial telephone numbers that are too long to fit into a memory location.
Use Two Memory Locations
You can store a number of more than 24 digits by dividing it and storing it in two memory locations.
Follow the directions for storing numbers in
To dial, lift the handset or press
, listen for a dial tone, then:
•Press the memory button for the first location (or press 
and a memory location
•Press and release the memory
button (or press 
and a memory location
Combine Manual and Memory Dialing
Instead of using two memory loca- tions, you might choose to store only part of a long number. You can use memory dialing to dial the stored por- tion, then dial the other digits manu- ally. If the stored portion is dialed first, wait for dialing to stop before you continue with manual dialing.
Erasing Numbers
To remove any number from memory, enter another number in the same location. To clear a memory location and leave it empty:
1Lift the handset or press 
.
2Press and release 
.
3Press the memory button
(or 
and a memory location button
4