Spectrum Brands SP-400 manual Programming Procedure

Page 26

Programming Procedure For SpectrumPlus tm Speed Dial Features

The SpectrumPLUST M Telephone has 11 one-touch speed dial locations that are convenient for dialing frequently used telephone numbers. Each speed dial location can store up to 32 digits. Follow the procedure below for programming the speed dial information.

Note 1: Speed dial programming must be done with the telephone plugged into the telephone line and power adapter.

Note 2: Programming can be performed with the telephone on-hook.

Programming Procedure

1.Speed dial programming must be done with the telephone plugged into the telephone line.

2.The handset must be “off-hook” or Speakerphone On.

3.Press the “Store” key.

4.Dial the telephone number that is to be saved using the numeric dial pad.

5.Press the desired speed dial location keys (1-11) in which the number is to be saved.

6.To program additional numbers, repeat steps 3 thru 7.

7.Place the convenient pre-printed speed dial keycaps on the selected speed dial memory key or complete the paper index card and place it into the clear protective keycap. Install the keycap on the appropriate speed dial memory key.

NOTE: Blank index card sheets are provided for convenience. Complete and place the index card into the speed dial memory key.

26

Image 26
Contents Page This page is intentionally left blank Page Important Safety Instructions FCC Part 15 Compliance DOC Notice and Load Number Statement Consumer Information Page Page TOP Panel Page Right Side Left Side Rear Page Parts Check List Power Outlet Configuration Power Adapter Line Connection 120V AC Outlet Recovery Power Adapter providedConnector Configuration Power Adapter Phone ConnectionInstalling The Wall Power Adapter optional Directory Index Card Connecting the Handset Cord Installing the KeycapsWall Mounting the SpectrumPLUSTM Telephone Desk MountingMessage Waiting Light Indicator System Hold Feature Option Switch Programming The Flash Timing Using a Flash When DialingProgramming Flash Timing into Memory Programming Flash Timing Programming Example for 100mSProgramming Pause Into Speed Dial Using a Pause When DialingProgramming a Pause into Memory Programming Procedure Headset Feature Installing a HeadsetUsing a Headset Placing/Answering a Call Using the Headset On/Off FeatureHold Key Indicators In-Use IndicatorsSpeaker Line Indicators Headset Key IndicatorsPlacing a Call Using Speakerphone Using the Data Port Using the Hold Feature Using The Mute Feature Using the Redial Feature Using The Disconnect Feature Key Handset Volume Control Page Page Parts List To Place An OrderStatement of Limited Warranty