Spectrum Brands SP-400 manual Headset Feature, Installing a Headset

Page 27

Headset Feature

The SpectrumPLUSTM

is equipped

with

a

 

separate port for plugging in an optional

 

headset. The port is located on the bottom of

 

the base unit. The TeleMatrix FreeSpeechTM

 

Talk Feature is a unique TeleMatrix feature that

 

allows the user the freedom to “toggle” between

 

the headset, handset and speakerphone modes

 

during a conversation.

 

 

 

 

When the “HEADSET ON/OFF” key is ON,

 

pressing the “SPEAKER” key will activate the

 

speaker and disconnect the headset line

 

automatically. This feature avoids having to use

 

the hookswitch/handset to process telephone

 

calls while in headset mode.

 

 

 

The headset can be

purchased

from

a

!

TeleMatrix distributor. There are many varieties of headset models available.

Installing a Headset

NOTE: An external amplifier is NOT recommended. The phone has a built in amplifier.

?The headset port is located on the bottom side of the telephone base.

?Plug the modular end of the headset cord into the modular port of the telephone labeled “HEADSET” (figure 1).

?Press the “HEADSET ON/OFF” key to activate the headset. The LED above the key will illuminate to indicate that the headset is on (figure 2).

Figure 1

Figure 2

27

Image 27
Contents Page This page is intentionally left blank Page Important Safety Instructions FCC Part 15 Compliance DOC Notice and Load Number Statement Consumer Information Page Page TOP Panel Page Right Side Left Side Rear Page Parts Check List Power Outlet Configuration Power Adapter Phone Connection 120V AC Outlet Recovery Power Adapter providedConnector Configuration Power Adapter Line ConnectionInstalling The Wall Power Adapter optional Directory Index Card Installing the Keycaps Connecting the Handset CordDesk Mounting Wall Mounting the SpectrumPLUSTM TelephoneMessage Waiting Light Indicator System Hold Feature Option Switch Using a Flash When Dialing Programming Flash Timing into MemoryProgramming The Flash Timing Programming Example for 100mS Programming Flash TimingUsing a Pause When Dialing Programming a Pause into MemoryProgramming Pause Into Speed Dial Programming Procedure Installing a Headset Headset FeaturePlacing/Answering a Call Using the Headset On/Off Feature Using a HeadsetHeadset Key Indicators In-Use IndicatorsSpeaker Line Indicators Hold Key IndicatorsPlacing a Call Using Speakerphone Using the Data Port Using the Hold Feature Using The Mute Feature Using the Redial Feature Using The Disconnect Feature Key Handset Volume Control Page Page To Place An Order Parts ListStatement of Limited Warranty