Uniden DECT3181 manual Using the Answering System, Answering System Options Ans. Setup

Page 27

When you have new messages, the voice message icon ( ) appears in the display, and the light at the top of the handset blinks.

The voice message icon should disappear after you listen to all your new messages. If it doesn’t, you can reset it manually: With the phone in standby, open the menu and select Global Setup. Select VMWI Reset, then select Yes.

Using the Answering System

The answering system works with land line calls only. The system will not answer or take messages on incoming call on the paired Bluetooth phones.

Answering System Options (Ans. Setup)

You can change the answering system options from any handset. Just open the menu and select Ans. Setup. Select one of the following:

Setting

What it does...

Security Code

Enter a 2-digit PIN so you can access your answering

system from any touch-tone phone (see page 31).

 

 

 

 

Set the number of rings (2, 4, or 6) before the

Ring Time

answering system answers the phone. Choose Toll

Saver to have the system answer after 2 rings if you

 

 

have new messages or after 4 rings if you don’t.

 

Set the amount of time callers have to leave a message,

Record Time

either 1 minute or 4 minutes. Choose Announce Only

if you don’t want the system to let callers to leave a

 

 

message.

 

Have the system beep every 15 seconds when you have

Message Alert

a new message; the beeping stops when you listen

to all your new messages. (To mute the alert without

 

listening to your messages, press any key on the base.)

Ans.

Change the language of the system’s voice prompts.

Language

 

27

Image 27
Contents If You Contact Uniden’s Phone Number DECT3181 Series Users GuideWhats in the box? You will also findBattery pack Accessory Handset OptionsAC Adapter and Battery Specification Multirange Charger Accessory HandsetWhat’s in the manual? Important Safety InstructionsFor more details, see the Important Information section Installing Your PhoneCharge the battery Getting StartedConnect the TEL line jack to a standard telephone wall jack Setting Up the CellLink Bluetooth ConnectionConnect the telephone cord Test the connectionPress Menu/Select to display the handset’s main menu Pair your Bluetooth phonePage Setting Up Multirangetm Chargers To place a Multirange chargerFor more information, see the DRX312 user guide Key name and icon What it does Understanding Your PhoneParts of the Base Base keys and how they workWhile the phone is ringing mute Speaker volumeStandby start playing messages MessagesHandset keys and how they work Parts of the HandsetHighlighted item Down one lineStandby open the menu Menu or any list selectKey name and icon Display icons and what they meanIcon What it means Using the Menus Then all handsets will ring Setting What it doesIf all handsets are set to OFF default Privacy Setup only affects the ring otherBanner CoilRinger Tones Personal RingCustomer service How to enter text on your phoneDial Mode Set Line ModeUsing Your Phone Learning the BasicsFrom the land line From the cell phone Call waiting Using Caller ID and Redial ListsChange the volume Speaker and earpiece Ringer volume VolumeTo… Follow these steps … Using the Directory Option What it doesDownloading phonebooks into the directory Press Menu/Select Using a phonebookFollow these steps Dial an entryCreate New Using Multi-Handset FeaturesFinding a Lost Handset Phonebook menu optionsPrivacy mode Expanding your phoneConference calling To… On the land line Using CellLink Call transferIntercom Voice message notification Using Special FeaturesDo Not Disturb DND Chain dialingAnswering System Options Ans. Setup Using the Answering SystemAccessing the Answering System Call ScreenAns. On/off Record your personal outgoing message or greeting Switch between the two greetingsPersonalizing Your Greeting Getting Your MessagesFrom the base From a handset Screening Your CallsDialing in to your system Using the System While You’re Away from HomeProgramming a security code Remember to make a note of your new security codeUnavailable Solving ProblemsImportant Information If… Try…Announce Only Weak or hard to hear audio Noise or static on the line Installing a line filter or DSL filterHandset Base Changing from Tone to Pulse DialingDo you use a T-Coil hearing aid? Liquid damageSelect Base Unavailable Resetting and Registering HandsetsDo you have the base the handset is registered to? Yes Registering a handsetRegistering Does the handset fit in the base cradle? YesTry Say HandsetCompliance Information Page FCC Part 15 information Warrantor Uniden America Corporation Uniden Terminal equipment Radio equipmentUniden America Service Amon Carter Blvd Fort Worth, TX Other patents pending Exactly like the pictures