If… | Try… | |
| - Making sure your phone is in pairing mode. | |
| - Check your phone’s manual for instructions on | |
| Bluetooth device pairing. | |
| - Making sure your phone supports the | |
| Bluetooth | |
| - Making sure your phone is in range of the base | |
| - If DECT3181 appears in your cellular phone’s | |
The DECT3181 won’t | paired device list, remove it and try pairing | |
again. | ||
pair with my phone. | ||
- Turn your phone off, then turn it on again. | ||
| ||
| Repeat pairing steps. | |
| - Disconnecting the base AC adapter. Wait a | |
| few minutes, then reconnect it. Repeat pairing | |
| steps. | |
| - Checking the link order for that phone. In rare | |
| cases, some cellular phones may not be linked | |
| as the third or fourth cellular phone. | |
| - Adjusting the handset volume. | |
The DECT3181 paired | - Setting your cellular phone to transfer the | |
with my phone, but | audio to a Bluetooth device. Check your | |
phone’s manual for instructions on Bluetooth | ||
I can’t hear anything | ||
setup and options. | ||
through the handset. | ||
- Erase all Bluetooth pairing and repair again. To | ||
| erase the Bluetooth pairing, see page 15. |
Weak or hard to hear audio
If a caller’s voice sounds weak or soft, the signal might be blocked by large metal objects or walls; you might also be too far from the base, or the handset’s battery may be weak.
Try moving around while you’re on a call or moving closer to the base to see if the sound gets louder.
Make sure the handset’s battery is fully charged. Try adjusting the earpiece volume.
34