To... | From the base | From a handset | |
| Press Play/stop. | Press End or return the | |
| handset to the cradle. | ||
mute the call screen |
| ||
If you mute the call screen, the system continues | |||
without answering | |||
taking the message: it just stops playing through | |||
| |||
| the speaker. |
|
Using the System While You’re Away from Home
You can also use your answering system from any
Programming a security code
1.With the phone in standby, open the menu from any handset.
2.Select Ans. Setup, then select Security Code.
3.Use the number keypad to enter a
Remember to make a note of your new security code!
Dialing in to your system
1.Call your telephone number and wait for the system to answer.
If you have the Ring Time set to Toll Saver, the system answers after 2 rings if you have new messages and 4 rings if you don’t. You can hang up during the third or fourth ring.
If your answering system is off, it will answer after about ten rings and sound a series of beeps instead of your greeting.
2.During the greeting (or beeps), press 0 and immediately enter your security code. (If you enter it incorrectly 3 times, the system hangs up and returns to standby.)
3.The system announces the current time, the number of messages stored in memory, and a help prompt. Then it starts beeping intermittently to let you know it's waiting for your command.
4.When you hear the intermittent beeping, enter a command from the chart:
31