Does the handset fit in the base cradle?
Yes |
| No |
|
|
| ||
Place the handset |
| 1. | With the phone in standby, press and hold |
in the base. The |
|
| Find on the base for about 5 seconds. |
display should |
| 2. | On the handset you want to register, press |
say Handset |
|
| and hold # until the display says Handset |
Registering. |
|
| Registering (about 2 seconds). |
|
|
|
|
In about 30 seconds, the handset display should say Registration Complete. Press TALK/FLASH and make sure you get a dial tone.
If... | Try... |
- you don’t hear a dial tone | Making sure the handset is |
- the display says Registration Failed | fully charged, then starting |
| over at step 1. |
|
|
For information on resetting and registering MULTIRANGE chargers, see the manual that came with the MULTIRANGE handset.
AC Adapter and Battery Information
Use only the supplied AC adapters. Be sure to use the proper adapter for the base and any chargers.
Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.
Do not place the unit in direct sunlight or subject it to high temperatures.
Fully charged, the battery should provide about 10 hours of talk time and about 7 days of standby time. For best results, return the handset to the cradle after each call to keep it fully charged.
When the battery gets too low, the handset shows a low battery alert. If you hear a strange beep during a call, check the display: if you see the low battery alert, finish your conversation as quickly as possible and return the handset to the cradle. If the handset is in standby, none of the keys will operate.
38