If you are not certain of the profiles supported by your Bluetooth phone or if you have difficulty pairing your phone to the DECT3181, see the manual that came with your phone.
With the CellLink feature, you can essentially treat your cellular phone as a second line. You can use the DECT3181 handset to make and receive calls on your cellular phone number, put cellular calls on hold, and transfer calls to other handsets. See page 18 for more information.
Bluetooth wireless devices have a maximum range of about 10 feet (3 m); the actual range will vary depending on local conditions (obstacles, battery power, interference, etc.).
Pair your Bluetooth phone
Pairing “introduces” two Bluetooth devices and gives them permission to connect to each other. In most cases, once you pair a phone to the DECT3181, the two devices connect automatically whenever they detect each other. (If you have to manually reconnect each time, check the Bluetooth settings on your cellular phone.) You can pair your Bluetooth devices through the DECT3181 handset.
1.Press Menu/Select to display the handset’s main menu.
2.Select the Bluetooth menu, then select the Add Cellular submenu. The LED on the base begins to flash and the base goes into pairing mode when the handset displays Use Cellular to Pair (PIN 0000).
3.On your Bluetooth phone, start a search for other Bluetooth devices. (This process may take several seconds and it will be different for each mobile phone. See your phone owner’s manual for detailed instructions.)
4.Your phone should discover a device called DECT3181 or Handsfree device. When your phone asks if you want to pair with this device, answer yes.
5.If your phone prompts you for a PIN code or password to pair with the DECT3181, enter 0000 (four zeroes).
6.When your phone accepts the Bluetooth connection, the DECT3181 sounds a confirmation tone. The Bluetooth LED on the base and the Bluetooth status icon on the handset display, remain lit.