General Radio Operations: Receiving and Making Calls | |
|
|
Receiving and Making Calls
NOTE: Your DTR Series radio must be programmed to be fully compatible with other DTR Series radios and fully utilize all radio features. Refer to Chapter 3 - Advanced Radio Operations.
Types of Calls
Your radio can make and receive three different types of voice calls:
•PublicGroup –
•Private –
•PrivateGroup –
•Private Reply with Group Call – user receives a group call and replies back with a private call, thus not tying up the whole group.
Private Reply with Group Calls
An end user can create a group such as "Security Only” and privately response to that particular group.
Receiving a Call
When a call is received, the radio chirps and the display shows the call type and transmitting caller’s user ID or name.
Security | ||
Talkgrp in Use |
(Joe Smith)
Making a Call
1.Choose a contact from your Scroll List, Contacts, or Recent Call List.
2.Press and hold the PTT button. Begin speaking after the radio emits the talk permit tone. To maximize clarity, hold the radio
3.Release the PTT button to listen.
NOTE: If “User Not Available” displays, the recipient is either: In a Call, Out of Range, or Turned Off.
Press to cancel and then try the call again. When contacting a group, at least one member must be available for the call to be successful.
NOTE: Radio PTT button is disabled when accessory is connected to the radio. This can be done via CPS (customer programming software).
November 2008 |