Motorola DTR410 manual Creating the PublicGroup Contacts

Programming the Radio with Customer Programming Software (CPS) (DTR410 Only): Creating the PublicGroup Con-

Creating the PublicGroup Contacts

You need to enter a group’s information to make a PublicGroup call to it. For more details on PublicGroup Calls, see Selecting a Group ID.

1.Right-click Public Group, on the left of the CPS screen, and choose “Add”.

2.Enter the Group ID of the group you are calling.

3.Enter the Name of the group you are calling. This gives an easier way of remembering the contact, rather than just relying on the numeric Group ID.

4.Enter the Channel where the call takes place.

5.Choose the radios that belong to this group.

6.Enter the desired contact (the Homegroup) that you want to change to when the call ends, or when the radio is idle for over 30 seconds.

7.Enter the desired Ringer tone you want to hear, when receiving a call from this contact.

9980384R89-E November 2008