Radio Programming: Settings | |
|
|
3. Scroll to select Radio History and press 
under Select.
TX is the total amount of transmit time. RX is the total amount of receive time. IDL is the total time the radio has been turned on but not receiving or transmitting.
Reset Defaults
Choosing this option resets your radio back to factory default settings. All settings are reset, and all Contacts in the radio are deleted.
NOTE: :Reset Default is only used to reset a radio completely
From the Program Menu, scroll to select Reset Default and press 
under Select.
Scan Lists
This menu allows you to scan select PublicGroup contacts. Your radio always scans for PrivateGroup contacts you are a member of and for calls to your Private ID.
The Scan feature is turned On/Off in the Advanced Menu of User Mode.
Your radio can scan up to 10 PublicGroups per channel. Scan can be turned on and off from the Advanced Settings menu of User Mode, but what groups are scanned can only be changed in Programming Mode.
To access Scan Lists
1.From the Program Menu, scroll to select Settings and press 
under Select.
2.Scroll to select Advanced and press 
under Select.
3.Scroll to Scan Lists and press 
under Select.
4.Select the channel you wish to change the Scan List on.
5.A check mark indicates which PublicGroups are scanned on that channel.
6.Use the left option key to remove or add groups to your scan list.
Manager Mode
Manager Mode provides access to Remote Disable, Remote Monitor, and Remote Time functions in the User Menu.
The Manager Mode can only be accessed through the Programming Mode. After entering Programming Mode, proceed as follows to access the Manager Mode.
1.From the Program Menu, scroll to select Settings and press 
under Select.
2.Scroll to select Advanced and press 
under Select.
November 2008 |