BlueAnt Wireless manual X5 Stereo Bluetooth Headset

Page 32

32

X5 Stereo Bluetooth Headset

14.When I connect Audio Streamer to PC via the Y-cable, I hear mono sounds from Headset. Why?

When headset and Audio Streamer are first connected, it is always in A2DP mode. So, if you have accidentally pressed the ON/OFF button of headset, it will switch to Voice mode. So, if you hear sound in monaural form from the headset, press the ‘MFB’ of the X5 once to switch to Stereo.

15.Why is the X5 noisy and distorted?

A low battery can be the cause of bad voice quality. Please charge the headset. Some people like to have their phone ring loudly, but this may cause distortion when transferred to the X5 speaker. In your phone, set up a Profile with lower ringing volumes and keypad tones and activate when using with X5.(check your phone user manual for instructions on setting up profiles). Also, if the antenna strength from your phone network is weak, it may cause signal drop outs or disruption.

16.I want to connect the Headset with a Bluetooth phone and at the same time listen to music from an audio device using the Audio Streamer. How should I make the connection?

To use the Headset with two devices, you have to pair the Headset with both devices. First, pair Headset with Audio Streamer and then switch OFF

both devices. Next, pair Headset with Bluetooth phone and make the connection via Headset or Handsfree profile. Now, you can switch on the Audio Streamer to establish the connection with Headset. Please note that you can only realize A2DP connection between Headset and Audio Streamer because the Headset/Handsfree profile has already been used up by the Bluetooth phone.

17.While listening to music from an audio device connected to the Audio Streamer, I received a phone call and answered by pressing ‘MFB’ button. Although music stopped, I realized that when the music replayed, it was not at the point where it was first stopped.

When a call comes in, the music will be muted, not paused, i.e. it will keep playing in the background.

18.How can I connect the Audio Streamer with a TV and Hi-Fi Set or iPod?

You can connect the 3.5mm stereo cable into the Headphone Jack. If it doesn’t fit the plug, you can use an adapter which is available from any electronics type store for a few dollars.

Image 32
Contents Page X5 Stereo Bluetooth Headset Contents Frequently Asked Questions FAQ Safety Instructions Introduction X5 Stereo Bluetooth Headset Product Functions What’s included in the Package Packs in one packageBattery Ejector USB Port Audio Connector 5mm Stereo JackBattery Pack Mounting / Removing battery Wearing the HeadsetCharging the battery Battery InformationSwitching the Headset ON/OFF Pairing Headset with Bluetooth Devices Phone, PDAUsing the Headset to Make a Call Using the Headset to Answer a CallUsing Audio Streamer with Headset to Listen to Music Using the Audio Streamer with HeadsetSwitching the Audio Streamer ON/OFF Reconnecting Audio Streamer with Headset Remote Control Function Hints for Optimum Audio TransmissionPhone Software Resetting Your PhoneScatternet Connection Function / Button Matrix Audio Streamer LED Status Headset Status LED IndicatorHeadset LED Status Optional Item SpecificationsBattery Packs Bluetooth Answers General AnswersTroubleshooting Answers X5 Stereo Bluetooth Headset General FAQ How do I put the Stereo Headset in pairing mode? Can I use the X5 to listen to music from my mobile? Bluetooth FAQ What Bluetooth devices can use the X5 Headset? Can I use my Blueant X5 Headset with USB Bluetooth Dongles?Is my X5 Headset charged? Troubleshooting FAQHow do I re-connect my X5? Why can’t I hear any sound from the Speaker? X5 Stereo Bluetooth Headset What if my computer has built in Bluetooth? Can I use it? Why does my phone battery not last as long as it used to?Am having trouble pairing a second phone, what can I do? Warranty Process Contact UsProduct Warranty Disclaimer Notice