14 | X5 Stereo Bluetooth Headset |
Using the Headset to Make a Call
zMake sure Headset and mobile phone are connected and microphone plugged into USB port of the X5 Headset.
zTo make a call, dial from the mobile phone and when the dial tone is heard, click MFB once to switch over to Headset. For mobile phones supporting Handsfree profile, you can dial from mobile phone without having to click MFB.
zTo end the call, press the MFB once.
Notes: For some phones, the ON/OFF button is used to end the call.
For Bluetooth phones that support Handsfree Profile, clicking the MFB in a long manner will activate the phone to redial to the last number received or called. For redialing, the procedures may differ from one device to another. For some phones, clicking the MFB in a long manner will first activate the phone to display the list of the last numbers received or called. For others, clicking the MFB in a long manner will redial to the last number received or called directly. And again on others it will activate Voice dialing.
Using the Headset to Answer a Call
zTo be able to answer a call, the Headset and mobile phone must be connected and the microphone plugged into USB port of Headset.
zOn an incoming call, bell will ring from Headset and mobile phone. Call can be answered from phone or from Headset by pressing the MFB once.
zFor mobile phones supporting only headset profile, the ON/OFF button may be used to answer incoming call.
zTo disconnect the call, press MFB once. For mobile phones supporting only headset profile, the ON/OFF button is used to disconnect.
zIf the other party ends the call first, Headset will automatically enter into standby mode without the user having to press ON/OFF button to end the call.