46System software maintenance
Step Action
1At the server (host server), insert the MCG 3100 software CD into the
2Log on to the server as nortel.
3Locate the MCG 3100 software on the CD and run the following command:
appinstall
4Enter the root password.
5If you are prompted to remove a previous installation, enter Y (Yes) to confirm the deletion.
6If you are prompted to perform a reinstall (1) or an upgrade (2), press Enter to accept the default value (2).
The application RPM files are installed in the /opt/mobilitybase directory.
7Read the Nortel software license agreement.
8To agree to the license agreement, enter YES
9For a redundant server implementation, repeat Step 1 to Step 8 on the second server.
--End--
Procedure 13
Upgrading the MCG 3100 system software from the Web
ATTENTION
You must have access to the Nortel Enterprise Solutions PEP Library (ESPL) and you must know the MCG 3100 root password to perform the following procedure.
ATTENTION
If you have previously installed an SU, you must remove it before installing a new SU. For more information, see Procedure 14 “Removing an SU” (page 48)
Step Action
1From an
2After logging in, read the warning and then click Click Here.
3Scroll to the Communication Server 1000 / Meridan 1 PEP Tools section, locate the Patching Reference for CS 1000 Release 5.0 Systems, and click Click Here beside the entry.
Nortel Mobile Communication 3100 Series Portfolio
Nortel Mobile Communication Gateway 3100 Installation and Upgrades
9 May 2008