Nortel Networks MOG7xx, MOG6xx manual Wlan Handsets 2210/2211 configuration

Page 64

64

DHCP option 151

DNS lookup of “SLNKSVP2” if the DHCP options 6 (DNS Server) and 15 (Domain Name) are configured.

Server 1 IP – the published IP address of the BCM. If the wireless handset is using static IP address configuration, enter the published IP address of the BCM. If the WLAN handset is using DHCP, the DHCP Server must be configured to provide the published IP address (and UDP port number) of the BCM using one of the following DHCP options:

46, 128, 144, 157, 191, and 251.

Server 1 Port – the UDP port number used by the wireless handset to contact the LTPS Node Connect Service to request registration with the BCM. If the wireless handset is using static IP address configuration, enter port number 4100. If the WLAN handset is using DHCP, the DHCP Server must be configured to provide the published IP address and UDP port number of the BCM using one of the following DHCP options: 46, 128, 144, 157, 191, and 251.

The following components can be configured optionally:

TFTP Server IP – the IP address of the TFTP Server on the network that holds firmware images for updating the wireless handsets. If this feature is configured (not set to 0.0.0.0 or 255.255.255.255), either through Static IP configuration, through using DHCP option 66 (TFTP Server), or the Boot server/next server (siaddr) field, the wireless handset checks for different firmware each time it is powered on or comes back into range of the network. This check takes only a short time and ensures that all wireless handsets in the network are kept up-to-date with the same version of firmware.

Note: It does not matter if the firmware version on the TFTP Server is newer or older. If the versions are different, the wireless handsets download the firmware from the TFTP Server.

OAI Server IP – the IP address of the WLAN Application Gateway 2246 (if using). If using Static IP configuration, this is simply the IP address of the WLAN Application Gateway 2246. If DHCP is being used, the wireless handset tries DHCP option 152.

Default Gateway and Subnet Mask – used to identify subnets, when using a complex network which includes routers. Both of these fields must be configured (not set to 0.0.0.0 or 255.255.255.255) to enable the wireless handset to contact any network components on a different subnet. They can be configured using Static IP configuration or through DHCP options 3 (Default Gateway) and 1 (Subnet Mask) respectively. Contact the network administrator for the proper settings for the network.

Note: The wireless handsets cannot roam across subnets, since the wireless handsets cannot change their IP address while operational. Ensure that all the APs are attached to the same subnet for proper operation. The wireless handset can change subnets if DHCP is enabled, and the wireless handset is powered off, then back on, when within range of APs on a new subnet.

WLAN Handsets 2210/2211 configuration

Image 64
Contents Part No. N0008588 September 17 Safety North American Regulatory InformationCopyright 2004 Nortel Networks TrademarksInstallation and Configuration Guide Enhanced 911 ConfigurationRadio-frequency Interference Hearing Aid Compatibility Important Safety InstructionsRepairs Installation and Configuration Guide International Regulatory Information Limited Warranty ExclusionsWarranty Repair Services After Warranty ServiceContents Wlan IP Telephony Manager 2245 installation ContentsAppendix a Compatible Access Points Appendix C Testing the Wlan Handsets 2210/2211 Figures Contents Installation and Configuration Guide Tables Contents Installation and Configuration Guide Preface Before you beginText conventions Symbols used in this guidePreface Nortel Networks Wlan Handsets 2210/2211 IP telephonesAcronyms used in this guide CTE FTP Mlppp RPC Related publications Preface N0008588 How to get help How to get help Network configuration OverviewDescription OverviewBasic network configuration Tftp ServerWlan Handset 2210/2211 firmware upgrade Dhcp ServerDhcp options Option MeaningFirewall Wlan IP Telephony ManagerPhysical description Wlan IP Telephony Manager 2245 front panelFunctional description Wlan IP Telephony Manager 2245 firmware upgrade CapacitiesRoaming and handover APs on different subnets using WSSAPs on the same subnet Mobility across different subnets when using Dhcp Access PointRoaming and handover capabilities summary Network planning IP address planningProgramming Records IP addressing with DhcpWlan IP Telephony Manager 2245 installation Preparing to install the Wlan IP Telephony ManagerWlan IP Telephony Manager 2245 installation Required materialsMounting the Wlan IP Telephony Manager Pre-installation checklistWall-mounting the Wlan IP Telephony Manager Connecting to the LAN Connecting the powerRemoving a Wlan IP Telephony Manager Rack-mounting the Wlan IP Telephony ManagerWlan IP Telephony Manager 2245 installation Wlan IP Telephony Manager 2245 configuration Connecting to the Wlan IP Telephony ManagerConnecting through a serial port Wlan IP Telephony Manager 2245 configurationConnecting through a Telnet session Configuring the Wlan IP Telephony Manager NetLink SVP-II System menuConfiguring the network Network Configuration screenWlan IP Telephony Manager 2245 configuration Configuring the SVP-II SVP-II Configuration screenWlan IP Telephony Manager 2245 configuration Changing the password Change Password screenSaving the configuration SVP-Configuration screen with reset promptTelnet screen after reset Checking the system statusWlan Handsets 2210/2211 configuration Wlan Handsets 2210/2211 configurationWlan Handsets 2210/2211 Wired Equivalent Privacy Loss of signalWlan Handsets 2210/2211 functions LanguageFeature and key assignment CodecsJitter buffer RTP and RtcpIP Phone Wlan Handsets 2210/2211 configuration Wlan Handset Configuring the Wlan Handsets 2210/2211 IP Phone 2004 mapping to the wireless handsetsMaking an alphanumeric string entry Opening and using the Admin MenuKeys to enter non-numeric characters Sheet 1 Admin Menu options Sheet 1 Admin Menu optionsKeys to enter non-numeric characters Sheet 2 Admin Menu options Sheet 2 IP Address menuWlan Handsets 2210/2211 configuration Essid License ManagementRestore Defaults Site Survey modeRegulatory Domain SecurityTerminal type Downloading the Wlan handset firmware Admin PWOAI on/off Pre-download checklist Downloading the firmwareProgramming the Wlan Handsets 2210/2211 Configuring the idle state displayProgramming the Line keys Troubleshooting Troubleshooting the Wlan IP Telephony ManagerError Status screen TroubleshootingWlan IP Telephony Manager 2245 active alarms and actions Network Status screenNetwork Status screen Software Version Numbers screen Software Version Numbers screenFeature limitations Duplex mismatchSyslog Server Appendix a Compatible Access Points Appendix a Compatible Access PointsIntroduction SVP-compliant APs Sheet 1SVP-compliant APs Sheet 2 Appendix B Wlan Application Gateway Wlan Application GatewayModel numbers with maximum number of users Appendix B Wlan Application GatewayInstallation Model MOG6xxPreparing to install the Wlan Application Gateway Wall-mounting the Wlan Application Gateway Mounting the Wlan Application GatewayRack-mounting the Wlan Application Gateway Connecting to the Application Server Connecting through the LANConnecting through an RS-232 port Pins on the connectorConnect through a modem Wlan Application Gateway 2246 connection through a modemConfiguration Connecting to the Wlan Application Gateway04830130 Configuring the Wlan Application Gateway NetLink OAI System menuConfiguring the OAI Box OAI Box Configuration screenAllow FTP Connections Yes/No MOG 7xx only Continuing configuration through Telnet Connecting through TelnetPage Configuring the Telephone Line Telephone Line configurationDeleting a Wlan Handset 2210 or Searching for a Wlan Handset 2210/2211Programming a feature Setting or changing a password Feature programming screenChange password Viewing system statusViewing network status Network Status Viewing Telephone Line Status Telephone Line Status screenViewing software versions Certification testingWlan Application Gateway 2246 certification Wireless handset certification Software updates on MOG700 systemsUpdating software Software filesObtain software using FTP Tftp software updates for MOG600 Systems 105 Planning Worksheet for Wlan Handsets 2210/2211 Wlan Handset 2210/2211 Planning WorksheetFreeing the serial port for administrative purposes 108 Appendix C Testing the Wlan Handsets 2210/2211 Testing calls and featuresTesting signal strength with the Wlan handsets Appendix C Testing the Wlan Handsets 2210/2211110 111 112 Site Survey mode Appendix D ProvisioningSite survey Site certificationConducting an effective site survey Network usageMobility requirements Physical site studyRF transmission testing Example of AP placement116 Solving coverage issues Solving overlap issues118 Index BCMIndex

MOG6xx, MOG7xx specifications

Nortel Networks was a prominent player in the telecommunications industry, known for its innovative products and solutions. Among its offerings are the MOG6xx and MOG7xx series of voice over IP (VoIP) gateways, designed to enhance and facilitate voice communications over data networks.

The MOG6xx series, which includes models like MOG660 and MOG670, was introduced to serve as a bridge between traditional telephony and modern IP-based networks. These gateways feature advanced signaling and media capabilities that make them an essential tool for businesses looking to migrate to IP telephony. The MOG6xx series supports a wide range of protocols, including SIP, H.323, and MGCP, ensuring interoperability with various systems and devices.

One of the key characteristics of the MOG6xx series is its scalability. These gateways offer flexible capacity options that allow organizations to start with a smaller investment and expand as their communication needs grow. Additionally, the MOG6xx series is designed to support numerous simultaneous calls, ensuring that businesses can operate efficiently even during peak usage times.

The MOG7xx series, including the MOG770 and MOG730 models, builds upon the foundational technologies of the MOG6xx with enhanced features and capabilities. The MOG7xx series focuses on providing higher capacity and advanced functionalities, making it particularly suitable for larger enterprises or service providers. Key features include improved echo cancellation, advanced call routing, and enhanced security protocols to protect voice data from unauthorized access.

Both the MOG6xx and MOG7xx series leverage Nortel's expertise in voice quality assurance through integrated voice processing technologies. This ensures that calls maintain high audio quality, crucial for effective communication. Additionally, these gateways support various codecs to accommodate different network conditions, further enhancing their versatility.

In terms of management, both series are equipped with user-friendly interfaces and robust diagnostic tools that enable administrators to efficiently monitor and manage voice traffic. This not only simplifies troubleshooting but also assists in optimizing network performance.

Overall, the Nortel MOG6xx and MOG7xx series provide reliable, scalable, and flexible solutions for organizations looking to integrate voice communications with their data networks. Their support for industry-standard protocols, commitment to voice quality, and advanced feature set make them standout options in the increasingly competitive landscape of VoIP gateways.