Nortel Networks MOG7xx, MOG6xx Restore Defaults, Site Survey mode, Regulatory Domain, Security

Page 66

66

Restore Defaults

The Restore Defaults option resets all user and administrative parameters to their factory defaults. During configuration, press the right arrow to skip this mode.

Site Survey mode

Site Survey Mode is used to check the signal strength from APs. Site Survey Mode must be set to 10 to make a connection. When Site Survey Mode is selected, the wireless handset remains in this mode until it is powered off. During configuration, press the right arrow to skip this mode. See “Site survey” on page 113 for more information on using this mode.

Regulatory Domain

The Regulatory Domain defaults to North America on the wireless handset display. FCC requirements dictate that the menu for changing the domain be available by password, which in this case is the LINE button. To change the domain, press LINE and then enter the digits that represent the domain of the site. Both digits must be entered.

The following are domain digits:

•01 – North America

•02 – Europe (except Spain and France) and Japan

•04 – Spain

•05 – France

Note: As of this writing, Spain and France are adopting the general European Regulatory rules. Check with the wireless LAN administrator or supplier for the correct domain to enter in these countries.

Security

The following are the security options:

•None – disables any 802.11 encryption or security authentication mechanisms.

•WEP – a wireless encryption protocol that encrypts data frames on the wireless medium, providing greater security in the wireless network. If WEP Encryption is required at this site, each wireless handset must be configured to correspond with the encryption protocol set up in the APs. Select the entries from the following options to enable the wireless handset to acquire the system.

Note: By default, WEP options are off. If WEP is desired, options must be set in the wireless handset that match those set in the APs.

WLAN Handsets 2210/2211 configuration

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Part No. N0008588 September 17 Copyright 2004 Nortel Networks SafetyNorth American Regulatory Information TrademarksEnhanced 911 Configuration Installation and Configuration GuideRadio-frequency Interference Important Safety Instructions Hearing Aid CompatibilityRepairs Installation and Configuration Guide International Regulatory Information Limited Warranty ExclusionsWarranty Repair Services After Warranty ServiceContents Wlan IP Telephony Manager 2245 installation ContentsAppendix a Compatible Access Points Appendix C Testing the Wlan Handsets 2210/2211 Figures Contents Installation and Configuration Guide Tables Contents Installation and Configuration Guide Preface Before you beginSymbols used in this guide Text conventionsPreface Nortel Networks Wlan Handsets 2210/2211 IP telephonesAcronyms used in this guide CTE FTP Mlppp RPC Related publications Preface N0008588 How to get help How to get help Description Network configurationOverview OverviewBasic network configuration Tftp ServerWlan Handset 2210/2211 firmware upgrade Dhcp ServerDhcp options Option MeaningFirewall Wlan IP Telephony ManagerPhysical description Wlan IP Telephony Manager 2245 front panelFunctional description Wlan IP Telephony Manager 2245 firmware upgrade CapacitiesAPs on different subnets using WSS Roaming and handoverAPs on the same subnet Access Point Mobility across different subnets when using DhcpRoaming and handover capabilities summary Network planning IP address planningProgramming Records IP addressing with DhcpWlan IP Telephony Manager 2245 installation Wlan IP Telephony Manager 2245 installationPreparing to install the Wlan IP Telephony Manager Required materialsPre-installation checklist Mounting the Wlan IP Telephony ManagerWall-mounting the Wlan IP Telephony Manager Removing a Wlan IP Telephony Manager Connecting to the LANConnecting the power Rack-mounting the Wlan IP Telephony ManagerWlan IP Telephony Manager 2245 installation Connecting through a serial port Wlan IP Telephony Manager 2245 configurationConnecting to the Wlan IP Telephony Manager Wlan IP Telephony Manager 2245 configurationConnecting through a Telnet session Configuring the Wlan IP Telephony Manager NetLink SVP-II System menuConfiguring the network Network Configuration screenWlan IP Telephony Manager 2245 configuration Configuring the SVP-II SVP-II Configuration screenWlan IP Telephony Manager 2245 configuration Changing the password Change Password screenSaving the configuration SVP-Configuration screen with reset promptTelnet screen after reset Checking the system statusWlan Handsets 2210/2211 configuration Wlan Handsets 2210/2211 configurationWlan Handsets 2210/2211 Wlan Handsets 2210/2211 functions Wired Equivalent PrivacyLoss of signal LanguageJitter buffer Feature and key assignmentCodecs RTP and RtcpIP Phone Wlan Handsets 2210/2211 configuration Wlan Handset Configuring the Wlan Handsets 2210/2211 IP Phone 2004 mapping to the wireless handsetsOpening and using the Admin Menu Making an alphanumeric string entryKeys to enter non-numeric characters Sheet 1 Admin Menu options Admin Menu options Sheet 1Keys to enter non-numeric characters Sheet 2 Admin Menu options Sheet 2 IP Address menuWlan Handsets 2210/2211 configuration Essid License ManagementRegulatory Domain Restore DefaultsSite Survey mode SecurityTerminal type Admin PW Downloading the Wlan handset firmwareOAI on/off Pre-download checklist Downloading the firmwareConfiguring the idle state display Programming the Wlan Handsets 2210/2211Programming the Line keys Error Status screen TroubleshootingTroubleshooting the Wlan IP Telephony Manager TroubleshootingWlan IP Telephony Manager 2245 active alarms and actions Network Status screenNetwork Status screen Software Version Numbers screen Software Version Numbers screenFeature limitations Duplex mismatchSyslog Server Introduction Appendix a Compatible Access PointsAppendix a Compatible Access Points SVP-compliant APs Sheet 1SVP-compliant APs Sheet 2 Model numbers with maximum number of users Appendix B Wlan Application GatewayWlan Application Gateway Appendix B Wlan Application GatewayInstallation Model MOG6xxPreparing to install the Wlan Application Gateway Mounting the Wlan Application Gateway Wall-mounting the Wlan Application GatewayRack-mounting the Wlan Application Gateway Connecting to the Application Server Connecting through the LANConnecting through an RS-232 port Pins on the connectorConnect through a modem Wlan Application Gateway 2246 connection through a modemConfiguration Connecting to the Wlan Application Gateway04830130 Configuring the Wlan Application Gateway NetLink OAI System menuConfiguring the OAI Box OAI Box Configuration screenAllow FTP Connections Yes/No MOG 7xx only Continuing configuration through Telnet Connecting through TelnetPage Configuring the Telephone Line Telephone Line configurationDeleting a Wlan Handset 2210 or Searching for a Wlan Handset 2210/2211Programming a feature Setting or changing a password Feature programming screenChange password Viewing system statusViewing network status Network Status Viewing Telephone Line Status Telephone Line Status screenCertification testing Viewing software versionsWlan Application Gateway 2246 certification Updating software Wireless handset certificationSoftware updates on MOG700 systems Software filesObtain software using FTP Tftp software updates for MOG600 Systems 105 Planning Worksheet for Wlan Handsets 2210/2211 Wlan Handset 2210/2211 Planning WorksheetFreeing the serial port for administrative purposes 108 Testing signal strength with the Wlan handsets Appendix C Testing the Wlan Handsets 2210/2211Testing calls and features Appendix C Testing the Wlan Handsets 2210/2211110 111 112 Site survey Site Survey modeAppendix D Provisioning Site certificationMobility requirements Conducting an effective site surveyNetwork usage Physical site studyRF transmission testing Example of AP placement116 Solving coverage issues Solving overlap issues118 Index BCMIndex

MOG6xx, MOG7xx specifications

Nortel Networks was a prominent player in the telecommunications industry, known for its innovative products and solutions. Among its offerings are the MOG6xx and MOG7xx series of voice over IP (VoIP) gateways, designed to enhance and facilitate voice communications over data networks.

The MOG6xx series, which includes models like MOG660 and MOG670, was introduced to serve as a bridge between traditional telephony and modern IP-based networks. These gateways feature advanced signaling and media capabilities that make them an essential tool for businesses looking to migrate to IP telephony. The MOG6xx series supports a wide range of protocols, including SIP, H.323, and MGCP, ensuring interoperability with various systems and devices.

One of the key characteristics of the MOG6xx series is its scalability. These gateways offer flexible capacity options that allow organizations to start with a smaller investment and expand as their communication needs grow. Additionally, the MOG6xx series is designed to support numerous simultaneous calls, ensuring that businesses can operate efficiently even during peak usage times.

The MOG7xx series, including the MOG770 and MOG730 models, builds upon the foundational technologies of the MOG6xx with enhanced features and capabilities. The MOG7xx series focuses on providing higher capacity and advanced functionalities, making it particularly suitable for larger enterprises or service providers. Key features include improved echo cancellation, advanced call routing, and enhanced security protocols to protect voice data from unauthorized access.

Both the MOG6xx and MOG7xx series leverage Nortel's expertise in voice quality assurance through integrated voice processing technologies. This ensures that calls maintain high audio quality, crucial for effective communication. Additionally, these gateways support various codecs to accommodate different network conditions, further enhancing their versatility.

In terms of management, both series are equipped with user-friendly interfaces and robust diagnostic tools that enable administrators to efficiently monitor and manage voice traffic. This not only simplifies troubleshooting but also assists in optimizing network performance.

Overall, the Nortel MOG6xx and MOG7xx series provide reliable, scalable, and flexible solutions for organizations looking to integrate voice communications with their data networks. Their support for industry-standard protocols, commitment to voice quality, and advanced feature set make them standout options in the increasingly competitive landscape of VoIP gateways.
Top Page Image Contents