Nortel Networks MOG6xx, MOG7xx manual Essid, License Management

Page 65

65

•Server 2 IP – the IP address of the secondary Nortel Networks device. Currently, the wireless handset does not make use of this information. If using Static IP configuration, this is simply the IP address of the device. If DHCP is being used, the wireless handset tries to obtain the device’s IP address and port information using the following DHCP options:

46, 128, 144, 157, 191, and 251.

•Server 2 Port – the port number used by the secondary Nortel Networks device to communicate with IP phones. Currently, the wireless handset does not make use of this information. If using Static IP configuration, consult the device’s documentation for port numbers. If DHCP is being used, the wireless handset tries to obtain the device’s IP address and port information using the following DHCP options: 43, 128, 144, 157, 191, and 251.

ESSID

Select the option that enables the wireless handset to acquire APs with the correct ESSID each time it is turned on.

With regard to Automatic Learn options, Broadcast ESSID must be enabled in the APs for ESSID learning to function (or contact the AP vendor for specifics). Overlapping wireless systems complicate the use of ESSID learning, as the wireless handset in an overlapping area could receive conflicting signals. If this is the situation at the site, use Static Entry or Learn Once in an area without overlapping ESSIDs.

•Learn Once – allows the wireless handset to scan all ESSIDs for a DHCP Server or TFTP Server, or both. Once either is found, the wireless handset retains the ESSID from the AP with which it associates at that point. When overlapping wireless systems exist, the Learn Once feature allows the wireless handset to use only the ESSID established the first time at all subsequent power-ons. This ESSID is retained by the wireless handset until the ESSID option is reselected.

•Learn Always – allows the wireless handset to automatically learn the ESSID at each power-on or loss of contact with the wireless LAN (out of range). This may be useful if the wireless handset will be used at more than one site.

•Static Entry – if the APs do not accept Broadcast ESSID, or if there are overlapping wireless systems in use at the site, enter the correct ESSID manually.

License Management

License Management enables selection of the VoIP protocol that the site is licensed to download and run. The UNIStim Protocol to use for the WLAN Handsets 2210/2211 is 010. Any other protocol causes the wireless handset to malfunction.

After selecting the correct protocol for the site, Nortel Networks recommends upgrading the firmware for the wireless handsets. See WLAN Handset 2210/2211 firmware upgrade on page 31.

WLAN Handsets 2210/2211 configuration

Page 64 Page 66
Image 65
Page 64 Page 66
Contents Part No. N0008588 September 17 North American Regulatory Information SafetyCopyright 2004 Nortel Networks TrademarksRadio-frequency Interference Enhanced 911 ConfigurationInstallation and Configuration Guide Repairs Important Safety InstructionsHearing Aid Compatibility Installation and Configuration Guide International Regulatory Information Exclusions Limited WarrantyAfter Warranty Service Warranty Repair ServicesContents Contents Wlan IP Telephony Manager 2245 installationAppendix a Compatible Access Points Appendix C Testing the Wlan Handsets 2210/2211 Figures Contents Installation and Configuration Guide Tables Contents Installation and Configuration Guide Before you begin PrefacePreface Symbols used in this guideText conventions IP telephones Nortel Networks Wlan Handsets 2210/2211Acronyms used in this guide CTE FTP Mlppp RPC Related publications Preface N0008588 How to get help How to get help Overview Network configurationDescription OverviewTftp Server Basic network configurationDhcp Server Wlan Handset 2210/2211 firmware upgradeOption Meaning Dhcp optionsWlan IP Telephony Manager FirewallWlan IP Telephony Manager 2245 front panel Physical descriptionFunctional description Capacities Wlan IP Telephony Manager 2245 firmware upgradeAPs on the same subnet APs on different subnets using WSSRoaming and handover Roaming and handover capabilities summary Access PointMobility across different subnets when using Dhcp IP address planning Network planningIP addressing with Dhcp Programming RecordsPreparing to install the Wlan IP Telephony Manager Wlan IP Telephony Manager 2245 installationWlan IP Telephony Manager 2245 installation Required materialsWall-mounting the Wlan IP Telephony Manager Pre-installation checklistMounting the Wlan IP Telephony Manager Connecting the power Connecting to the LANRemoving a Wlan IP Telephony Manager Rack-mounting the Wlan IP Telephony ManagerWlan IP Telephony Manager 2245 installation Connecting to the Wlan IP Telephony Manager Wlan IP Telephony Manager 2245 configurationConnecting through a serial port Wlan IP Telephony Manager 2245 configurationConnecting through a Telnet session NetLink SVP-II System menu Configuring the Wlan IP Telephony ManagerNetwork Configuration screen Configuring the networkWlan IP Telephony Manager 2245 configuration SVP-II Configuration screen Configuring the SVP-IIWlan IP Telephony Manager 2245 configuration Change Password screen Changing the passwordSVP-Configuration screen with reset prompt Saving the configurationChecking the system status Telnet screen after resetWlan Handsets 2210/2211 Wlan Handsets 2210/2211 configurationWlan Handsets 2210/2211 configuration Loss of signal Wired Equivalent PrivacyWlan Handsets 2210/2211 functions LanguageCodecs Feature and key assignmentJitter buffer RTP and RtcpIP Phone Wlan Handsets 2210/2211 configuration Wlan Handset IP Phone 2004 mapping to the wireless handsets Configuring the Wlan Handsets 2210/2211Keys to enter non-numeric characters Sheet 1 Opening and using the Admin MenuMaking an alphanumeric string entry Keys to enter non-numeric characters Sheet 2 Admin Menu optionsAdmin Menu options Sheet 1 IP Address menu Admin Menu options Sheet 2Wlan Handsets 2210/2211 configuration License Management EssidSite Survey mode Restore DefaultsRegulatory Domain SecurityTerminal type OAI on/off Admin PWDownloading the Wlan handset firmware Downloading the firmware Pre-download checklistProgramming the Line keys Configuring the idle state displayProgramming the Wlan Handsets 2210/2211 Troubleshooting the Wlan IP Telephony Manager TroubleshootingError Status screen TroubleshootingNetwork Status screen Wlan IP Telephony Manager 2245 active alarms and actionsNetwork Status screen Software Version Numbers screen Software Version Numbers screenDuplex mismatch Feature limitationsSyslog Server Appendix a Compatible Access Points Appendix a Compatible Access PointsIntroduction SVP-compliant APs Sheet 1SVP-compliant APs Sheet 2 Wlan Application Gateway Appendix B Wlan Application GatewayModel numbers with maximum number of users Appendix B Wlan Application GatewayModel MOG6xx InstallationPreparing to install the Wlan Application Gateway Rack-mounting the Wlan Application Gateway Mounting the Wlan Application GatewayWall-mounting the Wlan Application Gateway Connecting through the LAN Connecting to the Application ServerPins on the connector Connecting through an RS-232 portWlan Application Gateway 2246 connection through a modem Connect through a modemConnecting to the Wlan Application Gateway Configuration04830130 NetLink OAI System menu Configuring the Wlan Application GatewayOAI Box Configuration screen Configuring the OAI BoxAllow FTP Connections Yes/No MOG 7xx only Connecting through Telnet Continuing configuration through TelnetPage Telephone Line configuration Configuring the Telephone LineSearching for a Wlan Handset 2210/2211 Deleting a Wlan Handset 2210 orProgramming a feature Feature programming screen Setting or changing a passwordViewing system status Change passwordViewing network status Network Status Telephone Line Status screen Viewing Telephone Line StatusWlan Application Gateway 2246 certification Certification testingViewing software versions Software updates on MOG700 systems Wireless handset certificationUpdating software Software filesObtain software using FTP Tftp software updates for MOG600 Systems 105 Wlan Handset 2210/2211 Planning Worksheet Planning Worksheet for Wlan Handsets 2210/2211Freeing the serial port for administrative purposes 108 Testing calls and features Appendix C Testing the Wlan Handsets 2210/2211Testing signal strength with the Wlan handsets Appendix C Testing the Wlan Handsets 2210/2211110 111 112 Appendix D Provisioning Site Survey modeSite survey Site certificationNetwork usage Conducting an effective site surveyMobility requirements Physical site studyExample of AP placement RF transmission testing116 Solving overlap issues Solving coverage issues118 BCM IndexIndex

MOG6xx, MOG7xx specifications

Nortel Networks was a prominent player in the telecommunications industry, known for its innovative products and solutions. Among its offerings are the MOG6xx and MOG7xx series of voice over IP (VoIP) gateways, designed to enhance and facilitate voice communications over data networks.

The MOG6xx series, which includes models like MOG660 and MOG670, was introduced to serve as a bridge between traditional telephony and modern IP-based networks. These gateways feature advanced signaling and media capabilities that make them an essential tool for businesses looking to migrate to IP telephony. The MOG6xx series supports a wide range of protocols, including SIP, H.323, and MGCP, ensuring interoperability with various systems and devices.

One of the key characteristics of the MOG6xx series is its scalability. These gateways offer flexible capacity options that allow organizations to start with a smaller investment and expand as their communication needs grow. Additionally, the MOG6xx series is designed to support numerous simultaneous calls, ensuring that businesses can operate efficiently even during peak usage times.

The MOG7xx series, including the MOG770 and MOG730 models, builds upon the foundational technologies of the MOG6xx with enhanced features and capabilities. The MOG7xx series focuses on providing higher capacity and advanced functionalities, making it particularly suitable for larger enterprises or service providers. Key features include improved echo cancellation, advanced call routing, and enhanced security protocols to protect voice data from unauthorized access.

Both the MOG6xx and MOG7xx series leverage Nortel's expertise in voice quality assurance through integrated voice processing technologies. This ensures that calls maintain high audio quality, crucial for effective communication. Additionally, these gateways support various codecs to accommodate different network conditions, further enhancing their versatility.

In terms of management, both series are equipped with user-friendly interfaces and robust diagnostic tools that enable administrators to efficiently monitor and manage voice traffic. This not only simplifies troubleshooting but also assists in optimizing network performance.

Overall, the Nortel MOG6xx and MOG7xx series provide reliable, scalable, and flexible solutions for organizations looking to integrate voice communications with their data networks. Their support for industry-standard protocols, commitment to voice quality, and advanced feature set make them standout options in the increasingly competitive landscape of VoIP gateways.
Top Page Image Contents