Nortel Networks MOG6xx, MOG7xx manual Limited Warranty, Exclusions

Page 7

7

Safety

WARNING!

Only qualified service personnel may install this equipment. The instructions in this manual are intended for use by qualified service personnel only.

Only qualified persons should service the system.

The installation and service of this hardware is to be performed only by service personnel having appropriate training and experience necessary to be aware of hazards to which they are exposed in performing a task and of measures to minimize the danger to themselves or other persons.

Electrical shock hazards from the telecommunication network and AC mains are possible with this equipment. To minimize risk to service personnel and users, the system must be connected to an outlet with a third-wire Earth.

Service personnel must be alert to the possibility of high leakage currents becoming available on metal system surfaces during power line fault events near network lines. These leakage currents normally safely flow to Protective Earth via the power cord.

Therefore, it is mandatory that connection to an earthed outlet is performed first and removed last when cabling to the unit. Specifically, operations requiring the unit to be powered down must have the network connections (exchange lines) removed first.

Limited Warranty

Nortel Networks warrants this product against defects and malfunctions during a one (1) year period from the date of original purchase. If there is a defect or malfunction, Nortel Networks shall, at its option, and as the exclusive remedy, either repair or replace the telephone set at no charge, if returned within the warranty period.

If replacement parts are used in making repairs, these parts may be refurbished, or may contain refurbished materials. If it is necessary to replace the telephone set, it may be replaced with a refurbished telephone of the same design and color. If it should become necessary to repair or replace a defective or malfunctioning telephone set under this warranty, the provisions of this warranty shall apply to the repaired or replaced telephone set until the expiration of ninety (90) days from the date of pick up, or the date of shipment to you, of the repaired or replacement set, or until the end of the original warranty period, whichever is later. Proof of the original purchase date is to be provided with all telephone sets returned for warranty repairs.

Exclusions

Nortel Networks does not warrant its telephone equipment to be compatible with the equipment of any particular telephone company. This warranty does not extend to damage to products resulting from improper installation or operation, alteration, accident, neglect, abuse, misuse, fire or natural causes such as storms or floods, after the telephone is in your possession.

Nortel Networks shall not be liable for any incidental or consequential damages, including, but not limited to, loss, damage or expense directly or indirectly arising from the customers use of or inability to use this telephone, either separately or in combination with other equipment. This paragraph, however, shall not apply to consequential damages for injury to the person in the case of telephones used or bought for use primarily for personal, family or household purposes.

Installation and Configuration Guide

Image 7
Contents Part No. N0008588 September 17 Trademarks SafetyNorth American Regulatory Information Copyright 2004 Nortel NetworksInstallation and Configuration Guide Enhanced 911 ConfigurationRadio-frequency Interference Hearing Aid Compatibility Important Safety InstructionsRepairs Installation and Configuration Guide International Regulatory Information Exclusions Limited WarrantyAfter Warranty Service Warranty Repair ServicesContents Contents Wlan IP Telephony Manager 2245 installationAppendix a Compatible Access Points Appendix C Testing the Wlan Handsets 2210/2211 Figures Contents Installation and Configuration Guide Tables Contents Installation and Configuration Guide Before you begin PrefaceText conventions Symbols used in this guidePreface IP telephones Nortel Networks Wlan Handsets 2210/2211Acronyms used in this guide CTE FTP Mlppp RPC Related publications Preface N0008588 How to get help How to get help Overview Network configurationOverview DescriptionTftp Server Basic network configurationDhcp Server Wlan Handset 2210/2211 firmware upgradeOption Meaning Dhcp optionsWlan IP Telephony Manager FirewallWlan IP Telephony Manager 2245 front panel Physical descriptionFunctional description Capacities Wlan IP Telephony Manager 2245 firmware upgradeRoaming and handover APs on different subnets using WSSAPs on the same subnet Mobility across different subnets when using Dhcp Access PointRoaming and handover capabilities summary IP address planning Network planningIP addressing with Dhcp Programming RecordsRequired materials Wlan IP Telephony Manager 2245 installationPreparing to install the Wlan IP Telephony Manager Wlan IP Telephony Manager 2245 installationMounting the Wlan IP Telephony Manager Pre-installation checklistWall-mounting the Wlan IP Telephony Manager Rack-mounting the Wlan IP Telephony Manager Connecting to the LANConnecting the power Removing a Wlan IP Telephony ManagerWlan IP Telephony Manager 2245 installation Wlan IP Telephony Manager 2245 configuration Wlan IP Telephony Manager 2245 configurationConnecting to the Wlan IP Telephony Manager Connecting through a serial portConnecting through a Telnet session NetLink SVP-II System menu Configuring the Wlan IP Telephony ManagerNetwork Configuration screen Configuring the networkWlan IP Telephony Manager 2245 configuration SVP-II Configuration screen Configuring the SVP-IIWlan IP Telephony Manager 2245 configuration Change Password screen Changing the passwordSVP-Configuration screen with reset prompt Saving the configurationChecking the system status Telnet screen after resetWlan Handsets 2210/2211 configuration Wlan Handsets 2210/2211 configurationWlan Handsets 2210/2211 Language Wired Equivalent PrivacyLoss of signal Wlan Handsets 2210/2211 functionsRTP and Rtcp Feature and key assignmentCodecs Jitter bufferIP Phone Wlan Handsets 2210/2211 configuration Wlan Handset IP Phone 2004 mapping to the wireless handsets Configuring the Wlan Handsets 2210/2211Making an alphanumeric string entry Opening and using the Admin MenuKeys to enter non-numeric characters Sheet 1 Admin Menu options Sheet 1 Admin Menu optionsKeys to enter non-numeric characters Sheet 2 IP Address menu Admin Menu options Sheet 2Wlan Handsets 2210/2211 configuration License Management EssidSecurity Restore DefaultsSite Survey mode Regulatory DomainTerminal type Downloading the Wlan handset firmware Admin PWOAI on/off Downloading the firmware Pre-download checklistProgramming the Wlan Handsets 2210/2211 Configuring the idle state displayProgramming the Line keys Troubleshooting TroubleshootingTroubleshooting the Wlan IP Telephony Manager Error Status screenNetwork Status screen Wlan IP Telephony Manager 2245 active alarms and actionsNetwork Status screen Software Version Numbers screen Software Version Numbers screenDuplex mismatch Feature limitationsSyslog Server SVP-compliant APs Sheet 1 Appendix a Compatible Access PointsAppendix a Compatible Access Points IntroductionSVP-compliant APs Sheet 2 Appendix B Wlan Application Gateway Appendix B Wlan Application GatewayWlan Application Gateway Model numbers with maximum number of usersModel MOG6xx InstallationPreparing to install the Wlan Application Gateway Wall-mounting the Wlan Application Gateway Mounting the Wlan Application GatewayRack-mounting the Wlan Application Gateway Connecting through the LAN Connecting to the Application ServerPins on the connector Connecting through an RS-232 portWlan Application Gateway 2246 connection through a modem Connect through a modemConnecting to the Wlan Application Gateway Configuration04830130 NetLink OAI System menu Configuring the Wlan Application GatewayOAI Box Configuration screen Configuring the OAI BoxAllow FTP Connections Yes/No MOG 7xx only Connecting through Telnet Continuing configuration through TelnetPage Telephone Line configuration Configuring the Telephone LineSearching for a Wlan Handset 2210/2211 Deleting a Wlan Handset 2210 orProgramming a feature Feature programming screen Setting or changing a passwordViewing system status Change passwordViewing network status Network Status Telephone Line Status screen Viewing Telephone Line StatusViewing software versions Certification testingWlan Application Gateway 2246 certification Software files Wireless handset certificationSoftware updates on MOG700 systems Updating softwareObtain software using FTP Tftp software updates for MOG600 Systems 105 Wlan Handset 2210/2211 Planning Worksheet Planning Worksheet for Wlan Handsets 2210/2211Freeing the serial port for administrative purposes 108 Appendix C Testing the Wlan Handsets 2210/2211 Appendix C Testing the Wlan Handsets 2210/2211Testing calls and features Testing signal strength with the Wlan handsets110 111 112 Site certification Site Survey modeAppendix D Provisioning Site surveyPhysical site study Conducting an effective site surveyNetwork usage Mobility requirementsExample of AP placement RF transmission testing116 Solving overlap issues Solving coverage issues118 BCM IndexIndex

MOG6xx, MOG7xx specifications

Nortel Networks was a prominent player in the telecommunications industry, known for its innovative products and solutions. Among its offerings are the MOG6xx and MOG7xx series of voice over IP (VoIP) gateways, designed to enhance and facilitate voice communications over data networks.

The MOG6xx series, which includes models like MOG660 and MOG670, was introduced to serve as a bridge between traditional telephony and modern IP-based networks. These gateways feature advanced signaling and media capabilities that make them an essential tool for businesses looking to migrate to IP telephony. The MOG6xx series supports a wide range of protocols, including SIP, H.323, and MGCP, ensuring interoperability with various systems and devices.

One of the key characteristics of the MOG6xx series is its scalability. These gateways offer flexible capacity options that allow organizations to start with a smaller investment and expand as their communication needs grow. Additionally, the MOG6xx series is designed to support numerous simultaneous calls, ensuring that businesses can operate efficiently even during peak usage times.

The MOG7xx series, including the MOG770 and MOG730 models, builds upon the foundational technologies of the MOG6xx with enhanced features and capabilities. The MOG7xx series focuses on providing higher capacity and advanced functionalities, making it particularly suitable for larger enterprises or service providers. Key features include improved echo cancellation, advanced call routing, and enhanced security protocols to protect voice data from unauthorized access.

Both the MOG6xx and MOG7xx series leverage Nortel's expertise in voice quality assurance through integrated voice processing technologies. This ensures that calls maintain high audio quality, crucial for effective communication. Additionally, these gateways support various codecs to accommodate different network conditions, further enhancing their versatility.

In terms of management, both series are equipped with user-friendly interfaces and robust diagnostic tools that enable administrators to efficiently monitor and manage voice traffic. This not only simplifies troubleshooting but also assists in optimizing network performance.

Overall, the Nortel MOG6xx and MOG7xx series provide reliable, scalable, and flexible solutions for organizations looking to integrate voice communications with their data networks. Their support for industry-standard protocols, commitment to voice quality, and advanced feature set make them standout options in the increasingly competitive landscape of VoIP gateways.