Installing and configuring the Mobile Voice Client 2050
MVC 2050 configuration
Enable ClearType
The MVC 2050 uses a special screen font, which requires that ClearType® be enabled on your PDA.
To enable ClearType:
1.From the PDA’s Main Application screen, select Start.
2.Select Settings.
3.Select Screen.
4.Select Enable Clear Type.
Automatic Gain Control
Since the MVC 2050 requires a headset to operate properly, disabling Automatic Gain Control is sometimes necessary to attain optimum audio quality.
Note: When the PDA is used in handsfree mode, without a headset, the PDA microphone picks up sounds from the speaker, creating a feedback loop. Automatic Gain Control is used in this instance to avoid feedback. For further information about device hardware settings, see your PDA Help system.
To disable Automatic Gain Control:
1.Select Start.
2.Select Settings.
3.Select System.
4.Select one of the following, depending on the PDA you are using:
a.Audio
b.Advanced Sounds
c.Microphone
5.Select Automatic Gain Control.
17