Nortel Networks 150 manual CallPilot error messages, Already a member

Page 117

Chapter 11 Troubleshooting CallPilot 117

A mailbox is full

Mailboxes have a Never Full Mailbox feature, which lets callers leave messages in the mailbox, even if the mailbox is “full”. Messages are stored, but they cannot be accessed until the mailbox owner deletes some of the messages in the mailbox.

If more message time is required, you can change the mailbox Class of Service. For more information, refer to “Changing a mailbox” on page 32.

Deleting a mailbox

You cannot delete a mailbox that is used in a CCR Tree. If you delete a Mailbox node, any incoming messages for the Mailbox node are instead sent to the General Delivery Mailbox.

For more information about the General Delivery Mailbox, refer to “General Delivery Mailbox” on page 16.

CallPilot error messages

This table explains CallPilot error messages that appear on your display if you perform an incorrect action.

Message

Meaning

 

 

Already a member

Appears if you try add the same mailbox to a Group List twice.

 

You cannot assign a mailbox to the same Group List twice.

 

 

Cannot delete

Appears if you try to delete a Special Mailbox. The System Administrator and

 

General Delivery Mailboxes cannot be deleted.

 

 

Ext assigned

Appears if you try to assign an extension twice to the same mailbox, or if you try to

 

assign an extension to more than one mailbox.

 

 

Extension needed

Appears if you have not assigned a an extension or if you have not assigned an

 

extension from a Transfer node.

 

 

Incomplete tree

Appears if you try to enable a Tree before all the paths are added, or before all the

 

mailboxes used in the Tree are initialized.

 

 

Info mailbox

Appears if you try to change an Information Mailbox.

 

 

Intro too short

Appears if the introduction to a message being forwarded is less than three

 

seconds long.

 

 

Invalid class

Appears if you enter an incorrect Class of Service while you are adding or

 

changing a mailbox Class of Service.

 

 

Invalid ext

Appears if you enter an incorrect extension. You can check the extension number

 

length or use the Company Directory.

 

 

CallPilot 150 Telephone Administration Guide

Page 116 Page 118
Image 117
Page 116 Page 118
Contents CallPilot Telephone Administration Guide CallPilot 150 Telephone Administration Guide Contents Chapter Working with mailboxes Chapter Working with CCR Trees Chapter Troubleshooting CallPilot CallPilot features Chapter Getting started with CallPilotAbout CallPilot Message Networking CallPilot optionsCall Center Desktop MessagingTelephone How to get helpGetting started with CallPilot P0919416 System timeout Chapter Using CallPilotUsing CallPilot with a two line display telephone Who can use CallPilotTo enter a character Using the dialpadAbout telephone buttons Symbols and conventions used in this guideUsing CallPilot P0919416 About installing mailboxes System Administrator MailboxChapter CallPilot mailboxes Subscriber mailboxes General Delivery MailboxGuest mailboxes When to use Guest mailboxesInformation mailboxes Class of Service features Prompt language Mailbox Class of ServiceClass of Service Class of Service valuesCompany Directory Mailbox propertiesAlternate extensions To restrict outdialing Restricting outdialingTo initialize a mailbox Initializing a mailboxChapter Working with mailboxes Adding a Subscriber mailboxTo add a Subscriber mailbox Press OK To add a Guest mailbox Adding a Guest mailboxTo add an Information mailbox Adding an Information mailboxTo add multiple mailboxes Adding many mailboxesPress OK to end the session Incorrect password lock-out About mailbox passwordsTo change a mailbox Changing a mailboxService classx Press Next Press to end the session To delete a mailbox Deleting a mailboxAbout Group Lists About Sending Group List messagesAbout Group List Numbers To add a Group List Adding a Group ListTo change a Group List Changing a Group ListADD DEL View To delete a Group List Deleting a Group ListAbout the Automated Attendant Chapter Setting up the Automated AttendantGreeting Tables Greeting Type Default start timesAbout Company Greetings To record a company Greeting Recording a GreetingCustom prompts Setting up a Greeting TableTo set up a Greeting Table Chng DAY Next Mo nonb 600 pm To configure how a line is answered Configuring line answeringTo change or view how a line is answered Changing line configurationTo assign or change the number of rings Assigning the number of rings before CallPilot answersTo set up Touchtone Gate Setting up Touchtone GateTT gatecustom Destination number Table entry Incoming call example About the Clid Routing TableTo route a phone number To change or delete a phone number in the Clid Routing Table About Custom Call Routing Chapter Custom Call RoutingPlanning and designing a CCR Tree Components of a CCR TreeHome node Sub-menus Information MessagesTransfer nodes Mailbox nodesDestination types Paths⁄ ¤ ‹ › An example of a CCR TreeCustom Call Routing P0919416 Chapter Working with CCR Trees Building a CCR TreeTo build a CCR Tree To create a Home node Creating a Home nodeAdding nodes to the Home node To add a Menu node Adding a Menu nodeSave Print Quit To add an Information node Adding an Information nodePress END To add a Mailbox node Adding a Mailbox nodePress END To add a Transfer to an internal extension Adding a Transfer nodeTo add a Transfer to an external number About transfers to external numbersPress Othr Press Xfer ‹ or Paus Adding special characters to an external transfer numberTo assign a CCR Tree to a Greeting Table Assigning a CCR Tree to a Greeting TableTesting a CCR Tree To disable a TreeDisabling a CCR Tree To delete a Tree Deleting a CCR TreeChanging a CCR Tree message To change a Mailbox node Changing a Mailbox nodeTo change a destination type Changing a destination typeTo change a Transfer node Changing a Transfer nodeTo delete a Path Deleting a PathPress to end the session Chapter Broadcast and Information messages About Broadcast messagesTo record and send a Broadcast message Norstar Voice Mail To record and send a Broadcast message CallPilot About recording an Information mailbox message Information mailbox messagesTo record an Information mailbox message Recording an Information mailbox messageAbout resetting CallPilot To reset CallPilotChapter CallPilot operations To initialize CallPilot Initializing CallPilotTo reset the System Administrator password Resetting the System Administrator passwordOperator settings Setting the Operator statusTo set the Operator status Changing the Operator password To change the Operator passwordResetting the Operator password Changing the Operator default extension To change the Operator default extensionSetting the Business Status Setting up line answering To set the Business StatusTo assign Answer Lines To change the Automated Attendant status Setting the Automated Attendant statusLanguage availability CallPilot default system optionsTo change the Group List leading digit Group List leading digitTo enable or disable voicemail Company Directory To enable or disable the Company DirectoryTo designate the number of channels for outdialing OutdialingGeneral Delivery Mailbox To enable or disable the General Delivery MailboxTo enable a software authorization code Enabling a software authorization codeExternal Mailbox Initialization To enable or disable External Mailbox InitializationChapter Dialing Translation About Dialing TranslationHow the Dialing Translation Table works Input Output Examples of Dialing Translation TablesNetwork Access To set the Dialing Translation properties Setting Dialing Translation propertiesTo build a Dialing Translation Table Building a Dialing Translation TableTo review Dialing Translation Table entries Reviewing entries in the Dialing Translation TableTo change an entry in the Dialing Translation Table Changing a Dialing Translation Table entryTo delete an entry in the Dialing Translation Table Deleting a Dialing Translation Table entryChapter Troubleshooting CallPilot Telephone cannot be forwarded to the system Verify the correct extension is assigned to the mailbox You cannot create a Group List Already a member CallPilot error messagesInvalid key Mbox not init Not recorded Delayed answering by the Automated Attendant Chapter CallPilot configuration tipsRinging lines and answer buttons Ringing Answer buttonCallPilot configuration tips How to set up CallPilot for different businesses CallPilot for a small business On Your Toes Dance StudioCentral receptionist Costume Room Greeting for On Your ToesCallPilot for a medium business Bridge Stone Engineering Greeting for Bridge Stone Engineering Customer Service and Sales departmentShipping and Receiving ManagersFeature Compatibility Delayed Ring Transfer DRT Language choice Service Modes CallPilot configuration tips P0919416 Value or range Default Chapter Default configuration valuesDefault configuration values Message storage times Default configuration values P0919416 Glossary See Custom Call Routing ATA Feature code used to leave messages in CallPilot mailboxes Storage place for messages on the CallPilot system Returning CallPilot to its original default settings Push button telephone that emits Dtmf tones Glossary P0919416 Index Index Troubleshooting P0919416 Troubleshooting 113 Accessing a line or line Pool
Related manuals
Manual 149 pages 30.28 Kb Manual 68 pages 8.13 Kb Manual 68 pages 12.22 Kb
Top Page Image Contents