Nortel Networks 150 manual Adding many mailboxes, To add multiple mailboxes

Page 29

Chapter 4 Working with mailboxes 29

Adding many mailboxes

You can save time by creating multiple mailboxes when you set up CallPilot 150 for the first time, or when you need to add a large number of mailboxes to the CallPilot system. Adding many mailboxes creates Subscriber mailboxes for the range of extensions that you define. You must use extensions that are not already assigned to mailboxes. You can add mailboxes only for the amount of working telephone numbers that have specific extensions on your system.

To make the most effective use of adding multiple mailboxes, identify people who need a non-standard Subscriber mailbox. Create these mailboxes individually. Use Add Many Mailboxes to add the remaining mailboxes.

The mailboxes you create using Add Many Mailboxes have these characteristics:

•the mailbox number is the same as the extension number

•Class of Service is the same for all mailboxes

•the Call Screening setting is the same for all mailboxes

•the mailbox name is taken from the extension names assigned on your system. If extension names are not programmed, the mailbox number is used

•the Message Waiting Notification property is the same for all mailboxes

•the Outdial route is the same for all mailboxes

•the Display in Directory property is the same for all mailboxes

The mailboxes created are uninitialized and ready for initialization by mailbox owners.

A mailbox is not created if:

•a mailbox with the same number already exists

•the extension is used by another mailbox

•the extension is a CallPilot voice port

To add multiple mailboxes

Log:

QUIT RETRY OK

1Press ≤·°‹.

Enter the System Administrator mailbox number and password, and then press OK.

Admin

MBOX AA OTHR

2Press ﬂﬂ.

This option does not appear as a display button option.

Create mboxes

3This display appears briefly.

From ext:

RETRY QUIT

To ext:

RETRY QUIT

4Enter the extension number to start creating mailboxes from.

5Enter the extension number to stop creating mailboxes at.

CallPilot 150 Telephone Administration Guide

Image 29

Contents CallPilot Telephone Administration Guide CallPilot 150 Telephone Administration Guide Contents Chapter Working with mailboxes Chapter Working with CCR Trees Chapter Troubleshooting CallPilot About CallPilot CallPilot featuresChapter Getting started with CallPilot Message Networking CallPilot optionsCall Center Desktop MessagingTelephone How to get helpGetting started with CallPilot P0919416 System timeout Chapter Using CallPilotUsing CallPilot with a two line display telephone Who can use CallPilotTo enter a character Using the dialpadAbout telephone buttons Symbols and conventions used in this guideUsing CallPilot P0919416 Chapter CallPilot mailboxes About installing mailboxesSystem Administrator Mailbox Subscriber mailboxes General Delivery MailboxGuest mailboxes When to use Guest mailboxesInformation mailboxes Class of Service features Prompt language Mailbox Class of ServiceClass of Service Class of Service valuesCompany Directory Mailbox propertiesAlternate extensions To restrict outdialing Restricting outdialingTo initialize a mailbox Initializing a mailboxTo add a Subscriber mailbox Chapter Working with mailboxesAdding a Subscriber mailbox Press OK To add a Guest mailbox Adding a Guest mailboxTo add an Information mailbox Adding an Information mailboxTo add multiple mailboxes Adding many mailboxesPress OK to end the session Incorrect password lock-out About mailbox passwordsTo change a mailbox Changing a mailboxService classx Press Next Press to end the session To delete a mailbox Deleting a mailboxAbout Group List Numbers About Group ListsAbout Sending Group List messages To add a Group List Adding a Group ListTo change a Group List Changing a Group ListADD DEL View To delete a Group List Deleting a Group ListAbout the Automated Attendant Chapter Setting up the Automated AttendantGreeting Tables Greeting Type Default start timesAbout Company Greetings To record a company Greeting Recording a GreetingCustom prompts Setting up a Greeting TableTo set up a Greeting Table Chng DAY Next Mo nonb 600 pm To configure how a line is answered Configuring line answeringTo change or view how a line is answered Changing line configurationTo assign or change the number of rings Assigning the number of rings before CallPilot answersTo set up Touchtone Gate Setting up Touchtone GateTT gatecustom Destination number Table entry Incoming call example About the Clid Routing TableTo route a phone number To change or delete a phone number in the Clid Routing Table About Custom Call Routing Chapter Custom Call RoutingHome node Planning and designing a CCR TreeComponents of a CCR Tree Sub-menus Information MessagesTransfer nodes Mailbox nodesDestination types Paths⁄ ¤ ‹ › An example of a CCR TreeCustom Call Routing P0919416 To build a CCR Tree Chapter Working with CCR TreesBuilding a CCR Tree To create a Home node Creating a Home nodeAdding nodes to the Home node To add a Menu node Adding a Menu nodeSave Print Quit To add an Information node Adding an Information nodePress END To add a Mailbox node Adding a Mailbox nodePress END To add a Transfer to an internal extension Adding a Transfer nodeTo add a Transfer to an external number About transfers to external numbersPress Othr Press Xfer ‹ or Paus Adding special characters to an external transfer numberTo assign a CCR Tree to a Greeting Table Assigning a CCR Tree to a Greeting TableDisabling a CCR Tree Testing a CCR TreeTo disable a Tree To delete a Tree Deleting a CCR TreeChanging a CCR Tree message To change a Mailbox node Changing a Mailbox nodeTo change a destination type Changing a destination typeTo change a Transfer node Changing a Transfer nodeTo delete a Path Deleting a PathPress to end the session To record and send a Broadcast message Norstar Voice Mail Chapter Broadcast and Information messagesAbout Broadcast messages To record and send a Broadcast message CallPilot About recording an Information mailbox message Information mailbox messagesTo record an Information mailbox message Recording an Information mailbox messageChapter CallPilot operations About resetting CallPilotTo reset CallPilot To initialize CallPilot Initializing CallPilotTo reset the System Administrator password Resetting the System Administrator passwordTo set the Operator status Operator settingsSetting the Operator status Resetting the Operator password Changing the Operator passwordTo change the Operator password Setting the Business Status Changing the Operator default extensionTo change the Operator default extension To assign Answer Lines Setting up line answeringTo set the Business Status To change the Automated Attendant status Setting the Automated Attendant statusLanguage availability CallPilot default system optionsTo change the Group List leading digit Group List leading digitTo enable or disable voicemail Company Directory To enable or disable the Company DirectoryTo designate the number of channels for outdialing OutdialingGeneral Delivery Mailbox To enable or disable the General Delivery MailboxTo enable a software authorization code Enabling a software authorization codeExternal Mailbox Initialization To enable or disable External Mailbox InitializationHow the Dialing Translation Table works Chapter Dialing TranslationAbout Dialing Translation Input Output Examples of Dialing Translation TablesNetwork Access To set the Dialing Translation properties Setting Dialing Translation propertiesTo build a Dialing Translation Table Building a Dialing Translation TableTo review Dialing Translation Table entries Reviewing entries in the Dialing Translation TableTo change an entry in the Dialing Translation Table Changing a Dialing Translation Table entryTo delete an entry in the Dialing Translation Table Deleting a Dialing Translation Table entryChapter Troubleshooting CallPilot Telephone cannot be forwarded to the system Verify the correct extension is assigned to the mailbox You cannot create a Group List Already a member CallPilot error messagesInvalid key Mbox not init Not recorded Delayed answering by the Automated Attendant Chapter CallPilot configuration tipsRinging lines and answer buttons Ringing Answer buttonCallPilot configuration tips Central receptionist How to set up CallPilot for different businessesCallPilot for a small business On Your Toes Dance Studio Costume Room Greeting for On Your ToesCallPilot for a medium business Bridge Stone Engineering Greeting for Bridge Stone Engineering Customer Service and Sales departmentShipping and Receiving ManagersFeature Compatibility Delayed Ring Transfer DRT Language choice Service Modes CallPilot configuration tips P0919416 Value or range Default Chapter Default configuration valuesDefault configuration values Message storage times Default configuration values P0919416 Glossary See Custom Call Routing ATA Feature code used to leave messages in CallPilot mailboxes Storage place for messages on the CallPilot system Returning CallPilot to its original default settings Push button telephone that emits Dtmf tones Glossary P0919416 Index Index Troubleshooting P0919416 Troubleshooting 113 Accessing a line or line Pool

Related manuals

Manual 149 pages 30.28 Kb

Manual 68 pages 8.13 Kb

Manual 68 pages 12.22 Kb