Nortel Networks CallPilot 150 Quick Install Wizard parameters for a CallPilot 100/150

Page 10

10Initializing the CallPilot 100/150

2In the URL address box, type the CallPilot 100/150 IP address. For example: HTTP://192.168.110.10

Note: You must include HTTP:// to access CallPilot Manager.

The Quick Install Wizard screen appears. Depending on your system, this can take several minutes.

3Configure the Quick Install parameters for a CallPilot 100/150 according to following table.

Table 3 Quick Install Wizard parameters for a CallPilot 100/150

Field name

Description

 

 

 

IP Address

Enter the IP Address or Fully Qualified Domain Name (FQDN) for the CallPilot 100/150. If you do

 

not know the IP Address or FQDN, contact your network administrator.

 

This is the IP Address FQDN you will use to access the CallPilot 100/150 using CallPilot

 

Manager.

 

Changes to the IP Address take effect when you reboot the CallPilot 100/150.

 

If this is a re-install, the IP Address shows the current settings, not the factory default.

 

 

 

 

Warning: If you enter an FQDN in the IP Address box, you must ensure that the

 

FQDN for the CallPilot 100/150 is in the same subnet as is specified by the Subnet Mask

 

and the Default Gateway IP address. If you enter an FQDN that is not in the same

 

subnet, you may cause the CallPilot 100/150 to continuously reboot. To correct this

 

problem, use the serial interface to change the IP address of the CallPilot 100/150. For

 

more information, refer to “Changing the IP address using a serial cable” on page 7.

 

 

 

 

 

 

Subnet Mask

Enter the Subnet Mask for the CallPilot 100/150. If you do not know the Subnet Mask, contact

 

your network administrator.

 

Changes to the Subnet Mask take effect when you reboot the CallPilot 100/150.

 

If this is a re-install, the Subnet Mask shows the current settings, not the factory default.

 

 

 

Primary DNS

Enter the IP Address of the Primary DNS server that CallPilot 100/150 uses. If you do not know

 

the IP Address, contact your network administrator.

 

The Primary DNS server allows you to use domain names, such as www.nortelnetworks.com,

 

instead of IP addresses when accessing a site.

 

Note: If you do not use DNS, leave this box blank. CallPilot applications, such as Digital

 

Networking, can use a DNS server even if you leave this box blank.

 

 

 

Secondary DNS

Enter the IP Address of the Secondary DNS server that CallPilot 100/150 uses. If you do not

 

know the IP Address, contact your network administrator.

 

CallPilot 100/150 uses the Secondary DNS server if it cannot contact the Primary DNS server or

 

if the domain name is not listed in the Primary DNS server.

 

Note: If you do not use DNS, leave this box blank. CallPilot applications, such as Digital

 

Networking, can use a DNS server even if you leave this box blank.

 

 

 

Default Gateway

Enter the IP Address of the default next-hop router. If you do not know the IP Address, contact

 

your network administrator.

 

Note: If you do not require a next-hop router, leave this box blank.

 

 

 

Attendant DN

Enter the extension number of the CallPilot attendant.

 

 

 

N0008008 02

Image 10
Contents CallPilot 100/150 Quick Start Guide Trademarks Regulatory information for CallPilot 100/150Copyright 2004 Nortel Networks Statement of conditionsAbout CallPilot 100/150 CallPilot featuresCallPilot 100/150 offers Installing the CallPilot 100/150 Change the IP address Ethernet Serial or Ethernet cableConnecting the CallPilot 100/150 Mounting the CallPilot 100/150 on the wallInitializing the CallPilot 100/150 Initializing CallPilot 100/150 using CallPilot ManagerComputer requirements for CallPilot Manager If you cannot use the default IP address Connecting to the CallPilot 100/150If you can use the default IP address Changing the IP address using a serial cableChanging the IP address using the terminal Running the Quick Install Wizard Changing the IP address using an Ethernet crossover cableQuick Install Wizard parameters for a CallPilot 100/150 Default is North America Initializing CallPilot 100/150 using a telephone Outdial MethodDetermining CallPilot 100/150 Feature Codes ≤··Configuring the CallPilot 100/150 initial parameters Press ≤·‹Configuring the CallPilot 100/150 Additional informationAdditional information N0008008
Related manuals
Manual 2 pages 61.74 Kb

CallPilot 100, CallPilot 150 specifications

Nortel Networks CallPilot 150 and CallPilot 100 are integrated voice messaging platforms that cater to businesses seeking sophisticated communication solutions. These systems enable users to manage voice messages, emails, and fax services seamlessly, enhancing their productivity and streamlining communications.

Both systems are designed for medium to large-sized organizations, offering a range of features that make it easier to communicate effectively. One of the standout characteristics of CallPilot 150 and 100 is their user-friendly interface, which allows for easy navigation and management of messages via a telephone or computer. Users can listen to, forward, and manage their messages with simple prompts, ensuring a smooth experience.

The CallPilot systems support multiple languages, making them suitable for diverse workplaces. This multilingual capability allows businesses to cater to a broader customer base, facilitating better communication within multilingual environments. Additionally, the systems are equipped with automated attendant functionality, which can greet callers and guide them to the appropriate extension, improving customer service and reducing waiting times.

A key feature of both CallPilot models is their interoperability with Nortel’s phone systems, including Meridian and Norstar. This integration ensures that organizations can leverage their existing infrastructure while enhancing their capabilities with advanced messaging solutions. The systems provide unified messaging, enabling users to access their messages from different platforms like email, voicemail, and fax, which centralizes communication and improves responsiveness.

CallPilot 150 offers greater storage capacity compared to CallPilot 100, making it an ideal choice for organizations with higher messaging volume requirements. Both systems utilize digital recording technology that ensures high-quality message playback, ensuring clarity in communications.

Moreover, CallPilot solutions are equipped with security features that safeguard sensitive information from unauthorized access. These functions are crucial in today’s business environment, where data protection is paramount.

In summary, Nortel Networks CallPilot 150 and CallPilot 100 combine advanced technologies with practical features to deliver effective voice messaging solutions. Their user-centric design, interoperability with Nortel systems, and robust features make them suitable options for businesses aiming to enhance their communication strategies in a competitive marketplace.