14Initializing CallPilot 100/150 using a telephone
Configuring the CallPilot 100/150 initial parameters
To configure the CallPilot 100/150 initial parameters:
1. Press ≤·°‹.
Pswd:
RETRY OK
Bilingual?
YES NO
Primary lang?
ENG FRE
Group lists? Y
CHNG NEXT
Leading digit: 9
CHNG NEXT
CallPilot UI:Y
CHNG NEXT
This is the default System Administration feature code. If your system does not use the default feature codes, enter the System Administration feature code you determined earlier.
2.Enter ¤flfl‹›› (CONFIG) and press OK.
3.Press Y if you want the display and voice prompts to be available in two languages.
Press N if you want the display and voice prompts to be available in one language.
When you choose N (No) for the Bilingual option, step 6 is not required and the system automatically goes to step 7.
4.Press the button for the language you want as the Primary Language.
5.Press CHNG to toggle the settings between Y for Yes, or N for No.
6.Press NEXT.
When you choose N (No) for the enable Group List option, steps 9 and 10 are not required and the system automatically goes to step 11.
7.Press CHNG to enter a new Group List leading digit.
The Group List leading digit can be any number from 0 to 9. Special Mailbox numbers automatically begin with 1, so if you select a Group List leading digit of 1, the Special Mailboxes will begin with 2. The Group List Leading Digit cannot be the same as the first number of any mailbox.
8.Press NEXT.
9.Press CHNG to toggle the settings between Y for Yes, or N for No.
10.Press NEXT.
N0008008 02