12Initializing CallPilot 100/150 using a telephone
Table 3 Quick Install Wizard parameters for a CallPilot 100/150
Field name | Description |
|
|
Outdial Method | Select the outdial method you want to assign to the mailboxes created using the From Extension |
| and To Extension boxes. You can choose None, Line, Pool or Route. |
| If you select None, no outdial method is assigned to the mailboxes. |
| If you select Line, click the Outdial Method text box and enter the line number of the line you want |
| assign to the mailboxes. |
| If you select Pool, click the Outdial Method text box and enter the line pool number of the line |
| pool you want to assign to the mailboxes. |
| Note: Line pool numbers 0 to 15 correspond to the Line Pools A to O on the KSU programming |
| interface. |
| If you select Route, click the Outdial Method text box and enter the route number of the route you |
| want to assign to the mailboxes. |
|
|
4Click the Install button.
You can now start programming the CallPilot parameters. For information about how to program CallPilot, refer to the CallPilot Manager Set Up and Operation Guide.
Note: If you have changed any of the IP addresses or the Subnet Mask, you must reboot the CallPilot 100/150 before you start programming the CallPilot 100/150 parameters.
Initializing CallPilot 100/150 using a telephone
To initialize CallPilot 100/150 you need to:
•determine the CallPilot 100/150 Feature Codes
•configure the CallPilot 100/150 initial parameters
N0008008 02