Nortel Networks 2211, 2212 manual To select the Ring Delay

Chapter 2 WLAN Handsets overview 23

8Scroll to one of the desired options:

•Off — vibration is turned off.

•PBX — vibration uses the distinctive pattern sent to the handset from the call server.

•Continuous — vibration is continuous.

•Short Pulse — vibration occurs in short bursts.

•Long Pulse — vibration occurs in long bursts.

9Press the Select button (or OK) to select the highlighted option.

10Do one of the following:

•Press UP to return to the previous menu and configure another option.

•Press to exit all menus and return to the standby state.

You can also press Exit from the top-level menu to exit the menu and return to the active (off-hook) state.

To select the Ring Delay

Note: Ring Delay is not displayed in the menu when Ring Cadence or Vibrate Cadence is turned off.

1Press when the handset is in the standby state.

2Press the Up and Down buttons to scroll through the menu and highlight Ring Options.

3Press the Select button (or OK) to select Ring Options.

4Press the Up and Down buttons to scroll through the menu and highlight Telephone Ring.

5Press the Select button (or OK) to select Telephone Ring.

6Press the Up and Down buttons to scroll through the menu and highlight Ring Delay.

7Press the Select button (or OK) to select Ring Delay.

8Scroll to one of the desired options:

•No Delay — the handset rings and vibrates immediately.

•5 Second Delay — the handset vibrates for five seconds before ringing starts.

•10 Second Delay —the handst vibrates for 10 seconds before ringing starts.

9Press the Select button (or OK) to select the highlighted option.

10Do one of the following:

•Press UP to return to the previous menu and configure another option.

•Press to exit all menus and return to the standby state.

You can also press Exit from the top-level menu to exit the menu and return to the active (off-hook) state.

WLAN IP Handset 2210/2211/2212 User Guide