Nortel Networks 2211, 2212 manual Adjust ringer volume, Adjust speaker volume, Silence the ringer

Chapter 2 WLAN Handsets overview 27

Adjust ringer volume

You have two ways to adjust the ringer volume:

•Press the Up or Down button while the handset is ringing.

•configure the volume using the FCN button when in standby state. See “To select the Ring Volume” on page 22 for further information.

Adjust speaker volume

You can increase or decrease the speaker volume of the WLAN Handset 2211 only.

You have two ways to adjust the ringer volume:

•Press the Up or Down button while on a call.

•Configure the volume using the FCN button when in standby state.

To adjust speaker volume using the Function menu

1Press when the handset is in the standby state.

2Press the Up and Down buttons to scroll through the menu and highlight Push-to-Talk.

3Press the Select button (or OK) to select Push-to-Talk.

4Press the Up and Down buttons to scroll through the menu and highlight Audio Volume.

5Press the Select button (or OK) to select Audio Volume.

6Press the Up and Down buttons to adjust the volume to a suitable level.

7Press the Select button (or OK) to select the setting.

8Do one of the following:

•Press UP to return to the previous menu and configure another option.

•Press to exit all menus and return to the standby state.

You can also press Exit from the top-level menu to exit the menu and return to the active (off-hook) state.

Silence the ringer

You can silence (or mute) the WLAN Handset ringer.

You silence the ringer in one of two ways:

•To silence the ringer, press while the handset is ringing.

•Use the FCN menu in standby mode

WLAN IP Handset 2210/2211/2212 User Guide