Nortel Networks 2211, 2212 manual Task list

	Task list 3
Task list
To select the Keypad Autolock	19
To select a language	19
To select the Ring Cadence	20
To select the Ring Tone	21
To select the Ring Volume	22
To select the Vibrate Cadence	22
To select the Ring Delay	23
To select the Noise Mode	24
To select the Key Tones	24
To select the Warning Tones	25
To select the Display Contrast	25
To configure Push-to-Talk for the handset	26
To adjust speaker volume using the Function menu	27
To silence the ringer using the Function menu	28
To lock the keypad	28
To unlock the keypad	28
To activate a feature	32
To activate a function	32
To activate a feature	33
To use external autodial	33
To use internal autodial	33
To use features	33
To erase memory buttons	34
To make external calls using line keys	35
To make external calls using intercom keys	36
To make internal calls using intercom buttons	36
To respond to a Push-to-Talk call	38
To change the Push-to-Talk volume	38
To mute a current Push-to-Talk call	39
To unmute a Push-to-Talk call	39
To end a Push-to-Talk call	39
To answer a call during a Push-to-Talk call	39
To make a call during a Push-to-Talk call	40
To view the handset IP address	41
To view the server IP address	42
To view the handset firmware version	42
To view the current call server	42
To view the terminal type	43
To view the extension number	44
To remove the battery pack	53
To insert the battery pack	54
To change the battery pack while in a call	54
To charge the WLAN Handset Desktop Charger	55
To charge the WLAN Handset Dual Charger	57
To charge a battery pack	57
Quad Charger	57
To charge the battery pack	58

WLAN IP Handset 2210/2211/2212 User Guide