GE 00023598 manual Remote Access Commands, To access your answerer

To access your answerer:

1.Call your telephone number.

2.After you hear the beep that follows the greeting, enter your 3-digit security code. The unit confirms your code with a double beep and plays the remote menu. IF the wrong security code is entered the unit beeps three times and allows for correct code to be entered.

NOTE: To bypass the greeting, you can enter your 3-digit security code any time while the greeting is playing.

The unit waits for a remote command for 20 seconds after the correct security code has been entered. Menu selections can be made while the menu is playing.

NOTE: The unit answers on the 10th ring when it is turned off or the memory is full. To access the answerer, enter the 3-digit security code after the beep. If memory is full, play messages and erase some of them to restore memory.

NOTE: After the unit plays the remote menu, it waits 20 seconds for a command, then disconnects.

Remote Access Commands

Play new message	1
Play all messages	2
Repeat messages (during message playback)	5
Play previous message (during message playback)	6
Skip to next message (during message playback)	7
Erase message (during message playback)	0
Stop playback (during message playback)	4
Turn answerer on/off	3
End call	4

23