GE 00023598 manual Storing a Number in Memory

If you did not program your local area code in the setup menu

1.Use the SKIP or REPEAT button to scroll to the number you want to dial. You will only see 10-digit numbers (i.e. 234-555-1234).

2.See steps 2 through 4 in the above section to complete the dial back sequence.

NOTE: To cancel Dial Back, press the PLAY/STOP button or wait for the unit to return to the ready-to-answer mode.

Memory

You can store up to 13 numbers in memory for quick dialing – 3 in the quick dial buttons and 10 in the keypad numbers (0-9). Each memory location can store number up to 28 digits.

Storing a Number in Memory

1.Press the STORE button. The screen displays MENU TEL. NO..

2.Use the keypad to enter the phone number. You can put spaces in the number and it will still dial correctly. To enter a space, press the SKIP button.

•To scroll forward or backward, use the SKIP (when the cursor is not at the end of the number) or REPEAT button.

•To erase the current digit, press the DELETE button.

3.When finished, press the STORE button. The screen displays ENTER NAME.

4.Use the keypad to store a name (up to 16 characters). More than one letter or character is available in each of the number keys. For example, to enter the letter “A,” press the 2 key once. For a “B,” press the same key twice. For a “C,” press it three times.

•To add a space, press the SKIP button.

•To scroll forward or backward, use the SKIP or REPEAT button.

•To erase the current character, press the DELETE button.

27