INSTALLATION
Connect the line cord.
Plug one end of the telephone line cord into the jack labeled T E L L I N E on the back of the system. Plug the other end into a phone wall jack.
Connect the telephone.
NOTE: If you do not want to connect a telephone, skip to Step 3.
Plug the line cord from the telephone into the jack labeled T E L S E T on the back of the system.
Connect the power cord. | 1 |
| |
Plug the power cord into the jack labeled |
|
POWER and into an electrical outlet not |
|
controlled by a wall switch. Fit the power |
|
cord behind the strain relief tab. The |
|
Message Window flashes C L to indicate |
|
that you need to set the clock. |
|
Use only the power cord supplied with
,this product. I f you need a replacement, contact Lucent Technologies at 1 800