Installation
Charging the Handset
Wall-Mounting the Charger
To wall-mount the charger (Figure 10: Wall-Mounting the Charger):
1.Choose a suitable location for the charger
2.Install suitable fasteners 1 3/16” apart, leaving the heads out about 1/4”.
3.Run the AC adaptor cord through the notch in the bottom of the
4.Place the
5.Run the AC adaptor cord through the strain relief on the back of the charger, then plug the cord into the charger.
6.Snap the charger onto the
7.Plug the AC adaptor into the AC outlet.
Wall
Wall
Figure 10: Wall-Mounting the Charger
1
DS1000/2000 Cordless Telephone User Guide | Chapter 1: Installation ◆ 11 |