Pitney Bowes LPS-1 manual Installing the LA Roll, Available supplies

GETTING STARTED

Installing the LA Roll

There is a wide range of LA Rolls available for use with your LPS-1, allowing you to create almost any type of label you need.

Available supplies

The types of LA Rolls that may be used with the LPS-1 are listed below.

Stock No.

Description

LA0-2	4” Online Postage/PC Postage Label
LA0-5	Continuous Paper Tape
LA0-8	Large Address Label
LA0-9	Small Address Label

To obtain optimum performance, use only genuine Pitney Bowes accessories and LA Rolls.

Installing the LA Roll

1 Press the ON/OFF button to turn the LPS-1 off. Hold the LA Roll compartment cover at the sides near the front of the LPS-1 and firmly lift up to open the cover.

2 Place the spool into the spool guides in the LA Roll compartment.

• Make sure that the spool arms are inserted firmly in the spool guides on the left and right.

• Insert the spool with the LA Roll located on the right hand side of the LPS-1.

8

Installing the LA Roll