APPENDIX
Changing Cutter Unit
Repeated use of the cutter unit will eventually reduce the sharpness of the blade. When this occurs, purchase replacement blades and then follow this procedure to replace the cutter. Refer to Accessories on page 61 for details on purchasing replacement blades.
1 Turn off the
2 Open the LA Roll compartment cover, lift up the label lever, and remove the LA Roll from the compartment.
3 Using a screw driver, loosen the screw securing the cutter unit.
The screw securing the cutter unit cannot be completely removed. Simply loosen it to remove the cutter unit from the
4 Grip the tab and lift out the cutter unit.
Be very careful not to touch the sharp edge of the cutter.
5 Press the new cutter unit in the machine with the two holes aligned with the to posts in the machine.
6 Tighten the screw securing the cutter unit.
7 Install the LA Roll and close the LA Roll compartment cover. For details refer to “Installing the LA Roll” on page 8.
8 Plug the power cord back into the electrical outlet.
58 |
