Entering Selectable Features Mode
1. | With the unit , press and hold the button then press |
| the ⁄ button. The amber X will illuminate and a short |
| “beep” will sound. |
2.Immediately after the “beep”, digit # will appear and indicate the status of the sws™ Selectable Feature. To select digit #
3.If the selected digit is solid, feature is , but may be canceled by pressing the button. Two “beeps” and the flashing digit will confirm feature is .
4.If the selected digit is flashing, the feature is , but may be activated by pressing the button. A single “beep”and solid illumination will confirm the feature is .
5.Press the p/v button to retain your new settings for Selectable Features. Two “beeps” will confirm that you have exited from Selectable Features Mode and your unit will be .
installation
General Guidelines
Do not mount your unit directly behind windshield wipers or mirrored sunscreens which block Radar and Laser signals and substantially reduce warning range. Unlike “after market” mirrored
Radar signals are also reflected by the “heated windshields” known as Instaclear® and ElectriClear® available as an option on some vehicles. This type of windshield makes any dash, visor or windshield mounted detector ineffective. (If in doubt, check with an appropriate dealership to see if this applies to your vehicle.)
To achieve optimum performance, regardless of which mounting position you choose, follow these basic steps:
| Instaclear is a registered trademark of the Ford Motor Company. |
| ElectriClear is a registered Trademark of Libbey, Owens, Ford, and |
|
|